Mağaza Sayfası
Space Engineers
Tümü Tartışmalar Ekran Görüntüleri Çizimler Yayınlar Videolar Atölye Haberler Rehberler İncelemeler

Space Engineers

Mağaza Sayfası
Space Engineers >  Atölye > [DF] Solid Kullanıcısının Atölyesi
Yeterli oy yok
Modless Boarding Ramp (Large Ship)
Açıklama Tartışmalar0 Yorumlar5 Değişiklik Notları
   
Ödül
Favorilere Ekle
Favorilere Eklendi
Favorilerden Çıkar
Type: Blueprint
Mod category: Exploration
Dosya Boyutu
Gönderilme
722.114 KB
29 Oca 2016 @ 5:58
1 Değişiklik Notu ( görüntüle )
Oluşturan
[DF] Solid
Çevrimdışı
8 koleksiyona göz atın (bazıları gizli olabilir)
1,039 Tekil Ziyaretçi
81 Mevcut Abone
2 Mevcut Favoriler

İndirmek için abone ol
Modless Boarding Ramp (Large Ship)

Açıklama
MODLESS!

Per Request, a functioning boarding ramp for the large ship/station grid. It can be ascended without the use of a jetpack, and its angle of descent shoul be such thatthe end will remain flush with a level surface below.

Being made of larger blocks, I opted to leave out the pistons, as they would be too big to remain practical. Instead, we use only one rotor. There is a door and a timer mechanism to automatically seal the room when the ramp is closed. However, opening the ramp out of atmosphere will rapidly decompress the ship, as the doorwill open. For this reason, the ramp should only be activated out of atmosphere if you are prepared for the room to decompress!

A camera also allows views of the ramp remotely, so a pilot can see who/what is coming on or off. Forthe more militant ship, this could easily be replaced with an interior turret.

Thanks for your feedback!
5 Yorum
< >
condottiere 17 Nis 2022 @ 21:50 
Still a pretty clean design. Now we can make it even slimmer with a hinge instead of a rotor, and armor panels instead of armor blocks. Nice idea.
StephenGE0712 20 Nis 2016 @ 5:00 
thanks
[DF] Solid  [yaratıcı] 19 Nis 2016 @ 19:16 
@Stephen.edwards0712

I made it all out of light armor. As for the structure itself, it'll be rprety versatile. The minimum requirements tro function basically consist of an arm on a rotor. It's not excessively complicated, and you could probably reproduce it pretty easily depending on what you have and what you need.
StephenGE0712 17 Nis 2016 @ 12:51 
and how many of each block
StephenGE0712 17 Nis 2016 @ 12:51 
What did you make the ramp out of?