Winkelpagina
Space Engineers
Alles Discussies Screenshots Beeldmateriaal Uitzendingen Video's Workshop Nieuws Gidsen Recensies

Space Engineers

Winkelpagina
Space Engineers >  Workshop > Workshop van [DF] Solid
Onvoldoende beoordelingen
Modless Boarding Ramp (Large Ship)
Beschrijving Discussies0 Opmerkingen5 Wijzigingen
   
Prijs
Toevoegen aan favorieten
Toegevoegd aan favorieten
Verwijderen uit favorieten
Type: Blueprint
Mod category: Exploration
Bestandsgrootte
Geplaatst op
722.114 KB
29 jan 2016 om 5:58
1 wijzigingsnotitie (weergeven)
Gemaakt door
[DF] Solid
Offline
Alle 8 verzamelingen bekijken (sommige zijn mogelijk verborgen)
1,039 unieke bezoekers
81 huidige abonnees
2 huidige favorieten

Abonneren om te downloaden
Modless Boarding Ramp (Large Ship)

Omschrijving
MODLESS!

Per Request, a functioning boarding ramp for the large ship/station grid. It can be ascended without the use of a jetpack, and its angle of descent shoul be such thatthe end will remain flush with a level surface below.

Being made of larger blocks, I opted to leave out the pistons, as they would be too big to remain practical. Instead, we use only one rotor. There is a door and a timer mechanism to automatically seal the room when the ramp is closed. However, opening the ramp out of atmosphere will rapidly decompress the ship, as the doorwill open. For this reason, the ramp should only be activated out of atmosphere if you are prepared for the room to decompress!

A camera also allows views of the ramp remotely, so a pilot can see who/what is coming on or off. Forthe more militant ship, this could easily be replaced with an interior turret.

Thanks for your feedback!
5 opmerkingen
< >
condottiere 17 apr 2022 om 21:50 
Still a pretty clean design. Now we can make it even slimmer with a hinge instead of a rotor, and armor panels instead of armor blocks. Nice idea.
StephenGE0712 20 apr 2016 om 5:00 
thanks
[DF] Solid  [auteur] 19 apr 2016 om 19:16 
@Stephen.edwards0712

I made it all out of light armor. As for the structure itself, it'll be rprety versatile. The minimum requirements tro function basically consist of an arm on a rotor. It's not excessively complicated, and you could probably reproduce it pretty easily depending on what you have and what you need.
StephenGE0712 17 apr 2016 om 12:51 
and how many of each block
StephenGE0712 17 apr 2016 om 12:51 
What did you make the ramp out of?