Instalar Steam
iniciar sesión
|
idioma
简体中文 (chino simplificado)
繁體中文 (chino tradicional)
日本語 (japonés)
한국어 (coreano)
ไทย (tailandés)
Български (búlgaro)
Čeština (checo)
Dansk (danés)
Deutsch (alemán)
English (inglés)
Español de Hispanoamérica
Ελληνικά (griego)
Français (francés)
Italiano
Bahasa Indonesia (indonesio)
Magyar (húngaro)
Nederlands (holandés)
Norsk (noruego)
Polski (polaco)
Português (Portugués de Portugal)
Português-Brasil (portugués de Brasil)
Română (rumano)
Русский (ruso)
Suomi (finés)
Svenska (sueco)
Türkçe (turco)
Tiếng Việt (vietnamita)
Українська (ucraniano)
Comunicar un error de traducción
These ALMOST fit. I need an odd-order compatible version (lets say 15^2) I'd want the front cap trimmed by one block, the forward plate thinned to 1 block thick, then the middle section to 15 blocks long, the aft plate and engine bells are fine.. I would like the weight/density to be no worse than the stock large thruster per unit volume. I would like the efficiency to be somewhere between 10 and 20%. Not too particular about the thrust, but don't want it to be more than 50% worse than stock ion thrusters relative to mass or volume.
1. Open/create a creative world
2. Place thruster in empty space
3. Look at it, hit Ctrl+C
4. Hit F10 (blueprint menu) and create blueprint from clipboard
5. Open world you want to build thruster in
6. Use projector block to position thruster, and build...