Instal Steam
login
|
bahasa
简体中文 (Tionghoa Sederhana)
繁體中文 (Tionghoa Tradisional)
日本語 (Bahasa Jepang)
한국어 (Bahasa Korea)
ไทย (Bahasa Thai)
Български (Bahasa Bulgaria)
Čeština (Bahasa Ceko)
Dansk (Bahasa Denmark)
Deutsch (Bahasa Jerman)
English (Bahasa Inggris)
Español - España (Bahasa Spanyol - Spanyol)
Español - Latinoamérica (Bahasa Spanyol - Amerika Latin)
Ελληνικά (Bahasa Yunani)
Français (Bahasa Prancis)
Italiano (Bahasa Italia)
Magyar (Bahasa Hungaria)
Nederlands (Bahasa Belanda)
Norsk (Bahasa Norwegia)
Polski (Bahasa Polandia)
Português (Portugis - Portugal)
Português-Brasil (Bahasa Portugis-Brasil)
Română (Bahasa Rumania)
Русский (Bahasa Rusia)
Suomi (Bahasa Finlandia)
Svenska (Bahasa Swedia)
Türkçe (Bahasa Turki)
Tiếng Việt (Bahasa Vietnam)
Українська (Bahasa Ukraina)
Laporkan kesalahan penerjemahan
These ALMOST fit. I need an odd-order compatible version (lets say 15^2) I'd want the front cap trimmed by one block, the forward plate thinned to 1 block thick, then the middle section to 15 blocks long, the aft plate and engine bells are fine.. I would like the weight/density to be no worse than the stock large thruster per unit volume. I would like the efficiency to be somewhere between 10 and 20%. Not too particular about the thrust, but don't want it to be more than 50% worse than stock ion thrusters relative to mass or volume.
1. Open/create a creative world
2. Place thruster in empty space
3. Look at it, hit Ctrl+C
4. Hit F10 (blueprint menu) and create blueprint from clipboard
5. Open world you want to build thruster in
6. Use projector block to position thruster, and build...