Asenna Steam
kirjaudu sisään
|
kieli
简体中文 (yksinkertaistettu kiina)
繁體中文 (perinteinen kiina)
日本語 (japani)
한국어 (korea)
ไทย (thai)
български (bulgaria)
Čeština (tšekki)
Dansk (tanska)
Deutsch (saksa)
English (englanti)
Español – España (espanja – Espanja)
Español – Latinoamérica (espanja – Lat. Am.)
Ελληνικά (kreikka)
Français (ranska)
Italiano (italia)
Bahasa Indonesia (indonesia)
Magyar (unkari)
Nederlands (hollanti)
Norsk (norja)
Polski (puola)
Português (portugali – Portugali)
Português – Brasil (portugali – Brasilia)
Română (romania)
Русский (venäjä)
Svenska (ruotsi)
Türkçe (turkki)
Tiếng Việt (vietnam)
Українська (ukraina)
Ilmoita käännösongelmasta
These ALMOST fit. I need an odd-order compatible version (lets say 15^2) I'd want the front cap trimmed by one block, the forward plate thinned to 1 block thick, then the middle section to 15 blocks long, the aft plate and engine bells are fine.. I would like the weight/density to be no worse than the stock large thruster per unit volume. I would like the efficiency to be somewhere between 10 and 20%. Not too particular about the thrust, but don't want it to be more than 50% worse than stock ion thrusters relative to mass or volume.
1. Open/create a creative world
2. Place thruster in empty space
3. Look at it, hit Ctrl+C
4. Hit F10 (blueprint menu) and create blueprint from clipboard
5. Open world you want to build thruster in
6. Use projector block to position thruster, and build...