Steam installeren
inloggen
|
taal
简体中文 (Chinees, vereenvoudigd)
繁體中文 (Chinees, traditioneel)
日本語 (Japans)
한국어 (Koreaans)
ไทย (Thai)
Български (Bulgaars)
Čeština (Tsjechisch)
Dansk (Deens)
Deutsch (Duits)
English (Engels)
Español-España (Spaans - Spanje)
Español - Latinoamérica (Spaans - Latijns-Amerika)
Ελληνικά (Grieks)
Français (Frans)
Italiano (Italiaans)
Bahasa Indonesia (Indonesisch)
Magyar (Hongaars)
Norsk (Noors)
Polski (Pools)
Português (Portugees - Portugal)
Português - Brasil (Braziliaans-Portugees)
Română (Roemeens)
Русский (Russisch)
Suomi (Fins)
Svenska (Zweeds)
Türkçe (Turks)
Tiếng Việt (Vietnamees)
Українська (Oekraïens)
Een vertaalprobleem melden










These ALMOST fit. I need an odd-order compatible version (lets say 15^2) I'd want the front cap trimmed by one block, the forward plate thinned to 1 block thick, then the middle section to 15 blocks long, the aft plate and engine bells are fine.. I would like the weight/density to be no worse than the stock large thruster per unit volume. I would like the efficiency to be somewhere between 10 and 20%. Not too particular about the thrust, but don't want it to be more than 50% worse than stock ion thrusters relative to mass or volume.
1. Open/create a creative world
2. Place thruster in empty space
3. Look at it, hit Ctrl+C
4. Hit F10 (blueprint menu) and create blueprint from clipboard
5. Open world you want to build thruster in
6. Use projector block to position thruster, and build...