Nainstalovat Steam
přihlásit se
|
jazyk
简体中文 (Zjednodušená čínština)
繁體中文 (Tradiční čínština)
日本語 (Japonština)
한국어 (Korejština)
ไทย (Thajština)
български (Bulharština)
Dansk (Dánština)
Deutsch (Němčina)
English (Angličtina)
Español-España (Evropská španělština)
Español-Latinoamérica (Latin. španělština)
Ελληνικά (Řečtina)
Français (Francouzština)
Italiano (Italština)
Bahasa Indonesia (Indonéština)
Magyar (Maďarština)
Nederlands (Nizozemština)
Norsk (Norština)
Polski (Polština)
Português (Evropská portugalština)
Português-Brasil (Brazilská portugalština)
Română (Rumunština)
Русский (Ruština)
Suomi (Finština)
Svenska (Švédština)
Türkçe (Turečtina)
Tiếng Việt (Vietnamština)
Українська (Ukrajinština)
Nahlásit problém s překladem
These ALMOST fit. I need an odd-order compatible version (lets say 15^2) I'd want the front cap trimmed by one block, the forward plate thinned to 1 block thick, then the middle section to 15 blocks long, the aft plate and engine bells are fine.. I would like the weight/density to be no worse than the stock large thruster per unit volume. I would like the efficiency to be somewhere between 10 and 20%. Not too particular about the thrust, but don't want it to be more than 50% worse than stock ion thrusters relative to mass or volume.
1. Open/create a creative world
2. Place thruster in empty space
3. Look at it, hit Ctrl+C
4. Hit F10 (blueprint menu) and create blueprint from clipboard
5. Open world you want to build thruster in
6. Use projector block to position thruster, and build...