Subscribe to download
AutoLight with OccupacySensor

​ Tutorial: Simple IC10 Script for Lamps with a Sensor
What you need:

1x Circuit Housing

1x Occupancy Sensor (or Daylight Sensor if you want lights for a greenhouse)

1x to 5 Lamps

Setup:

In the slot d0, assign your Occupancy Sensor (or Daylight Sensor).

In the slots d1, d2, d3…, assign your lamps.

Example:

d1 = Lamp 1

d2 = Lamp 2

d3 = Lamp 3

If you add more lamps (up to 5), just continue with d4, d5.



Each lamp is controlled by an alias. For example:

"s light On r0" → lamp on d1 (lamp 1)

"s light2 On r0" → lamp on d2 (lamp 2)

"s light3 On r0" → lamp on d3 (lamp 3)

The script reads the sensor state (Activate) and sends it to the lamps:

If the sensor is active (1) → lamps turn ON.

If the sensor is inactive (0) → lamps turn OFF.

*If you use a Daylight Sensor, it will only activate during the day.

This is useful for controlling a Hydroponic Station or greenhouse lighting, so your lamps only turn on when there is daylight.