다운로드 위해 구독하기
Phenomenal Hardsuit Script

alias suit db alias helmet d0 alias isStormy r15 alias wasStormy r14 alias alarmTimer r13 define maxTemp 320 define minTemp 275 define maxKpa 150 define minKpa 40 #This script starts in automatic mode where the suit is on temp or kpa are bad, #and will open the suit automatically when they are good. When on, the filtration #will only trigger when needed to increase filter life. Each tick, the weather is #checked, regardless of suit status, but this only works with a second IC connected #to a weather station and a logic transmitter set to mirror the suit. This script #will work without that, but you won't recieve weather updates. Both the closed #and open modes can be overriden by manually opening or closing the helmet. #it will return to automatic mode by cycling the helmet back to the previous state. #This is handy if your base suddenly fills with toxins. And yes, it does still #check the weather. Check the workshop for the other script. It also allows #you to manually enable a tracking beacon by increasing the temperature #setpoint of the suit. s suit Setting 0 #prevent alarm from triggering on suit update ###AUTOMATIC LOOP LOGIC EnableLifeSupport: move r0 1 jal SetLifeSupportStatus WaitForSafety: yield jal CheckWeather #check for weather updates l r0 helmet Open #check manual override bnez r0 OverrideToOpen jal HandleFiltration l r0 suit TemperatureExternal #determine if helmet should remain closed bge r0 maxTemp WaitForSafety #check temp ble r0 minTemp WaitForSafety l r0 suit PressureExternal bge r0 maxKpa WaitForSafety #check pressure ble r0 minKpa WaitForSafety #continue to disable life support all conditions are good DisableLifeSupport: move r0 0 jal SetLifeSupportStatus WaitForDanger: jal CheckWeather #check for weather updates l r0 helmet Open #check manual override beqz r0 OverrideToClosed l r0 suit TemperatureExternal #determine if helmet should be closed bge r0 maxTemp EnableLifeSupport #check temp ble r0 minTemp EnableLifeSupport l r0 suit PressureExternal bge r0 maxKpa EnableLifeSupport #check pressure ble r0 minKpa EnableLifeSupport yield #maintain open loop while all conditions are good j WaitForDanger ###MANUAL LOOP LOGIC OverrideToOpen: move r0 0 jal SetLifeSupportStatus HoldOpenTillClosed: yield jal CheckWeather l r0 helmet Open beqz r0 EnableLifeSupport j HoldOpenTillClosed OverrideToClosed: move r0 1 jal SetLifeSupportStatus HoldClosedTillOpen: yield jal CheckWeather l r0 helmet Open bnez r0 DisableLifeSupport jal HandleFiltration j HoldClosedTillOpen ###WEATHER HELPER FUNCTION CheckWeather: l isStormy suit Setting #set by logic transmitter, mirrors mode of weather station seqz r0 wasStormy #check if storm status has changed since last tick and r0 r0 isStormy breqz r0 3 #skip starting alarm if status is unchanged (not stormy OR still stormy) move alarmTimer 1 #otherwise, enable alarm and sound alert s suit SoundAlert Sound.StormIncoming beqz alarmTimer FinishForecast #return if alarm is off brgt alarmTimer 6 6 #else, skip to end warning if alarm is finished add alarmTimer alarmTimer 1 #else, increment alarm timer l r0 helmet On #and flash helmet for visual indication seqz r0 r0 s helmet On r0 j FinishForecast #then return move alarmTimer 0 #skips here when alarm hits max time, disables sound and timer s suit SoundAlert 0 FinishForecast: move wasStormy isStormy #move current tick data to previous tick j ra #then return ###LIFE SUPPORT HELPER FUNCTION SetLifeSupportStatus: s suit On r0 s suit AirRelease r0 s suit Filtration r0 seqz r0 r0 s helmet Open r0 j ra ###FILTRATION HELPER FUNCTION HandleFiltration: l r0 helmet Pressure l r1 helmet RatioOxygen mul r0 r0 r1 sle r0 r0 30 s suit Filtration r0 j ra