Stormworks: Build and Rescue

Stormworks: Build and Rescue

Ei tarpeeksi arvosteluja
[Rythena] Mirage IIIDE JATO
   
Palkinto
Lisää suosikkeihin
Lisätty suosikkeihin
Poista suosikeista
Tiedostokoko
Julkaistu
190.741 KB
16.7.2024 klo 19.08
1 muutos ( näytä )

Tilaa ladataksesi
[Rythena] Mirage IIIDE JATO

1 kokoelmassa, tekijä Cailean.Coleman
Rythena Marines
108 luomusta
Kuvaus
Slap this on the Mirage IIIDE rear hardpoints near the back wing roots to allow for JATO takeoffs!


When performing a JATO takeoff make sure to get to a high speed taxi throttle and then flip the JATO switch, upon doing this raise the throttle to a low speed cruise and watch as you get lifted off of the ground and into the air! The JATO rockets will release when burnt.
11 kommenttia
Cailean.Coleman  [tekijä] 8.10.2024 klo 17.20 
a 57 may come one day
amcervantes80 8.10.2024 klo 15.41 
Can you make a SU-47
Cailean.Coleman  [tekijä] 6.8.2024 klo 6.48 
yay thx!
Goose 6.8.2024 klo 6.32 
super cool build
Goose 6.8.2024 klo 6.31 
i figured it out tysm
Goose 5.8.2024 klo 18.43 
hm, ill try and figure it out
Cailean.Coleman  [tekijä] 5.8.2024 klo 16.03 
furthest back
Goose 5.8.2024 klo 14.46 
is it ment to attach to the farthest back wing hardpoint?
Goose 5.8.2024 klo 14.33 
that would be nice cause im just confused,
Cailean.Coleman  [tekijä] 5.8.2024 klo 8.13 
ah sorry it is a tad hidden. so if you look at the jato you will notice a circle next to the pivot on the jato, That is the hardpoint. align the jets JATO hardpoint with the little circle and you should be good. Ill add an extra screenshot to if there is any confusion.