Winkelpagina
Stormworks: Build and Rescue
Alles Discussies Screenshots Beeldmateriaal Uitzendingen Video's Workshop Nieuws Gidsen Recensies

Stormworks: Build and Rescue

Winkelpagina
Stormworks: Build and Rescue >  Workshop > Workshop van Felix
Onvoldoende beoordelingen
LNER A1 "Flying Scotsman" - 4472 [Steam Locomotive]
Beschrijving Discussies0 Opmerkingen6 Wijzigingen
   
Prijs
Toevoegen aan favorieten
Toegevoegd aan favorieten
Verwijderen uit favorieten
Vehicles: Vehicle, Multi-vehicle, Exploration, Technical, Land, Mechanical, Advanced
Tags: v1.8.3
Bestandsgrootte
Geplaatst op
Bijgewerkt op
885.853 KB
30 apr 2023 om 8:51
11 jul 2023 om 12:31
11 wijzigingsnotities (weergeven)
Benodigde items
Voor dit item zijn de volgende items vereist
Gemaakt door
Felix
Offline
Alle 52 verzamelingen van Felix en anderen bekijken (sommige zijn mogelijk verborgen)
1,131 unieke bezoekers
2,214 huidige abonnees
16 huidige favorieten

Abonneren om te downloaden
LNER A1 "Flying Scotsman" - 4472 [Steam Locomotive]

In 1 verzameling van Felix
Felix’s Locomotive Works & Railway
12 items
Omschrijving

GIF By Klara

LNER A1 "Flying Scotsman" - 4472




Please provide description of any bugs found in the comments!

This is a recreation of the famous Flying Scotsmman[en.wikipedia.org] steam locomotive done in its LNER Apple Green livery. It was the first locomotive recorded to reach the speed of 100mph but sadly due to Stormworks limitations that is not possible. If you would like to find me for any reason you can find me under the username @felixmountain on the Stormworks Official Discord[discord.gg] server.


Startup:
  1. Ignite Firebox (Keep on)
  2. Turn Main Air Valve
  3. Wait for boiler temp to rise
  4. Piston throttle set to 0.4
  5. Lower brakes
  6. Regulator Up
  7. Reverser Up
Do not forget! Steam injector must be managed to keep water in the boiler.


Specifications:
  • Steam Chest Pressure: Displays steam pressure of steam wheel pistons (Spawns at -997, until you allow regulator)
  • Steam Injector Gauge: Shows the steam pressure of the steam powered injector pump.
  • Steam Injector: Allows water to fill the boiler, steam pistons must be running (Keep boiler water around red line, Runs best when not full)
  • Cylinder C0cks: Should be drained (Set to 1) before moving, Changes steam from coming out by wheels (0 on throttle) when regulator applied to coming out smoke stack (1 on throttle) when regulator applied.
  • Pistons: Steam powered generator, powers pumps, etc. Most efficient at 0.4 throttle
  • Brakes: Brakes of the locomotive, Spawns at 1
  • Tender Brakes: Turn crank to raise/lower the brake pressure for the tender
  • Regulator: Controls steam flow to the reverser & in turn wheels
  • Reverser: Throttle of the locomotive, Runs best at around 0.65 (Only when boiler at 160 degrees)
  • Crank: (Located at end of steam wheels under cab) Moves train forwards or backwards when button 2 blocks above clicked
  • Whistle: Turn the valve above firebox for whistle.
  • Pressure Overflow: Once boiler reached 9 pressure it will gradually start releasing, if it reaches 9.8 a high pitched whistle will start going off, this means the overflow is full, If your pressure is still increasing find a way to let more steam out or turn off firebox.
  • Radio: Radio to contact anyone within a 20km radius on any frequency
  • Tender Water: To fill the tender with water you must turn the labelled valve in the cab and operate the manual pump


Technical Information:
  • Mass: 10,183kg
  • Cost: $42,996
  • Coal: 977
  • Water: 8,346L
  • Top Speed: ~75mph
  • Max Travel Distance Before Refuel: ~182mi


Credits:
  • Great thanks to Lambo for help with the steam mechanisms.


Do not reupload any part of this creation without specific allowance.
6 opmerkingen
< >
Felix  [auteur] 17 mrt om 8:02 
@smyg_fis007 Yeah the loco currently requires you to consistently manually pump water into the boiler, the gases update caused this to happen. I do plan to fix it just haven't gotten around to it yet
smyg_fis007 9 nov 2024 om 1:47 
i got to work after manualy pumping steam injecttion to 55 and closing the regulator. I might just not know how to uise these
smyg_fis007 9 nov 2024 om 1:43 
Hi, Looks awesome but i can't get it to inject steam without pumping
Felix  [auteur] 27 jan 2024 om 15:24 
@Anguy Yes I do just trying to come up a system that will work
Anguy 7 jan 2024 om 4:51 
do you plan on fixing this mod?
Felix  [auteur] 16 jun 2023 om 13:39 
Please provide description of any bugs found in the vehicle here!