Trang cửa hàng
Transport Fever 2
Tất cả Thảo luận Ảnh chụp Tranh ảnh Phát sóng Video Workshop Tin tức Hướng dẫn Đánh giá

Transport Fever 2

Trang cửa hàng
Transport Fever 2 >  Workshop > Workshop của pyromanuel
83 lượt đánh giá
Blades and levers for switches 1.0
Mô tả Thảo luận1 Bình luận20 Ghi chú thay đổi
2
   
Giải thưởng
Yêu thích
Đã yêu thích
Bỏ thích
Track/Street: Track
Nhãn: swedish, waypoint, Switch
Kích cỡ file
Đã đăng
6.684 MB
19 Thg04, 2023 @ 4:24am
1 ghi chú thay đổi ( xem )
Tạo bởi
pyromanuel
Rời mạng
Xem tất cả 564 bộ sưu tập (một số có thể bị ẩn)
9,352 Số khách thăm độc nhất
3,413 Người đăng ký hiện tại
157 Lượt yêu thích

Đăng ký để tải xuống
Blades and levers for switches 1.0

Mô tả
Animated switch blades and switch levers.

This is a special waypoint that is used to animate switch blades and switch levers. Put the Waypoint marker at the straight track after the frog. The blades assumes the correct position when the track is reserved for a train in the game. Advantageously used together with Switch Kit DE/AT and is adapted to radii 190, 300 and 500.

Limitations:

Since the blades are built out of waypoints it will only sense trains in one direction. One therefore has to choose which direction the train most likely will come from. Works because of that best on one-way tracks.
Must be built on even ground and not in a bend. If the track is curving immediately after the switch the blades might be shifted sideways
There could be gaps between the blades and the rails of the switch in some cases. Try shifting along the track.

Use at your own risk.
Thảo luận nổi bật Xem tất cả (1)
2
6 Thg02, 2024 @ 10:16pm
Height setting
RadiKyle
20 bình luận
< >
Mr.Krash 23 Thg01 @ 7:03am 
Hello. Can't you move the rotation point closer to the switch? This would allow them to be installed on curved sections.
LeonidRUS07 11 Thg12, 2024 @ 3:24pm 
этот мод не работает. Выдаёт сразу красный треугольник когда его хочешь включить
45j54 12 Thg09, 2024 @ 4:32am 
yesh
pyromanuel  [tác giả] 9 Thg07, 2024 @ 6:59am 
Hello,
I have just watched your video from Mariupol and it looks great. I could look into curved switches at some point, but i hesitate to promise anyting.
Metathron 4 Thg05, 2024 @ 1:31pm 
Dear pyromanuel, I like your mod very much, it makes my builds much more realistic, and I can't really build switches without it anymore. You can check what it looks like if you'd like https://youtu.be/CFBMqR9dzOk .
However, because of that I'm a bit restricted with layouts I can build (only 3 strait 190, 300, 500 switches)
So my question is, is it possible to add at least a couple of another variations - blades for curved switches (the ones which can be created with switch kit), for a couple of radiuses like 300 & 500, and maybe also add option for radii 700, to be able to make high speed switches?
pyromanuel  [tác giả] 6 Thg02, 2024 @ 12:16pm 
As far as I know is it not possible to add a slider since it is a waypoint and not an asset. Wayppoints and signals can't have variables associated with them,
RailCowGirl 18 Thg01, 2024 @ 6:46am 
Is it possible to put in a slope slider? So we can use this awesome mod on sloped switches as well? :D
Brulikrax 14 Thg12, 2023 @ 5:20am 
Does it work or not?
Soul 24 Thg05, 2023 @ 5:41am 
it broke
Eating Animals 16 Thg05, 2023 @ 9:35am 
How about making it just a placeable asset as well? That way it could be used anywhere such as curves etc without need for animation.