商店頁面

Transport Fever 2

全部討論區螢幕擷圖藝術作品實況直播影片工作坊新聞指南評論

Transport Fever 2 > 工作坊 > pyromanuel 的工作坊

83 次評價

Blades and levers for switches 1.0

介紹討論區1 留言20 更新註記

獎勵

Track/Street: Track

標籤： swedish, waypoint, Switch

檔案大小

發佈於

6.684 MB

2023 年 4 月 19 日上午 4:24

1 項更新註記（檢視）

9,352	不重複訪客人數
3,417	目前訂閱人數
157	目前最愛人數

訂閱以下載
Blades and levers for switches 1.0

已訂閱

取消訂閱

描述

Animated switch blades and switch levers.

This is a special waypoint that is used to animate switch blades and switch levers. Put the Waypoint marker at the straight track after the frog. The blades assumes the correct position when the track is reserved for a train in the game. Advantageously used together with Switch Kit DE/AT and is adapted to radii 190, 300 and 500.

Limitations:

Since the blades are built out of waypoints it will only sense trains in one direction. One therefore has to choose which direction the train most likely will come from. Works because of that best on one-way tracks.
Must be built on even ground and not in a bend. If the track is curving immediately after the switch the blades might be shifted sideways
There could be gaps between the blades and the rails of the switch in some cases. Try shifting along the track.

Use at your own risk.

熱門討論檢視全部（1）

2024 年 2 月 6 日下午 10:16

Height setting

RadiKyle

20 則留言

< >

Mr.Krash 1 月 23 日上午 7:03

Hello. Can't you move the rotation point closer to the switch? This would allow them to be installed on curved sections.

LeonidRUS07 2024 年 12 月 11 日下午 3:24

этот мод не работает. Выдаёт сразу красный треугольник когда его хочешь включить

45j54 2024 年 9 月 12 日上午 4:32

yesh

pyromanuel [作者] 2024 年 7 月 9 日上午 6:59

Hello,
I have just watched your video from Mariupol and it looks great. I could look into curved switches at some point, but i hesitate to promise anyting.

Metathron 2024 年 5 月 4 日下午 1:31

Dear pyromanuel, I like your mod very much, it makes my builds much more realistic, and I can't really build switches without it anymore. You can check what it looks like if you'd like https://youtu.be/CFBMqR9dzOk .
However, because of that I'm a bit restricted with layouts I can build (only 3 strait 190, 300, 500 switches)
So my question is, is it possible to add at least a couple of another variations - blades for curved switches (the ones which can be created with switch kit), for a couple of radiuses like 300 & 500, and maybe also add option for radii 700, to be able to make high speed switches?

pyromanuel [作者] 2024 年 2 月 6 日下午 12:16

As far as I know is it not possible to add a slider since it is a waypoint and not an asset. Wayppoints and signals can't have variables associated with them,