商店页面

Transport Fever 2

全部讨论截图艺术作品实况直播视频创意工坊新闻指南评测

Transport Fever 2 > 创意工坊 > pyromanuel 的创意工坊

83 个评价

Blades and levers for switches 1.0

描述讨论1 留言20 改动说明

奖励

Track/Street: Track

标签：瑞典语, waypoint, Switch

文件大小

发表于

6.684 MB

2023 年 4 月 19 日上午 4:24

1 项改动说明（查看）

9,354	不重复访客数
3,423	当前订阅者
157	当前收藏人数

订阅以下载
Blades and levers for switches 1.0

已订阅

取消订阅

描述

Animated switch blades and switch levers.

This is a special waypoint that is used to animate switch blades and switch levers. Put the Waypoint marker at the straight track after the frog. The blades assumes the correct position when the track is reserved for a train in the game. Advantageously used together with Switch Kit DE/AT and is adapted to radii 190, 300 and 500.

Limitations:

Since the blades are built out of waypoints it will only sense trains in one direction. One therefore has to choose which direction the train most likely will come from. Works because of that best on one-way tracks.
Must be built on even ground and not in a bend. If the track is curving immediately after the switch the blades might be shifted sideways
There could be gaps between the blades and the rails of the switch in some cases. Try shifting along the track.

Use at your own risk.

热门讨论查看全部（1）

2024 年 2 月 6 日下午 10:16

Height setting

RadiKyle

20 条留言

< >

Mr.Krash 1 月 23 日上午 7:03

Hello. Can't you move the rotation point closer to the switch? This would allow them to be installed on curved sections.

LeonidRUS07 2024 年 12 月 11 日下午 3:24

этот мод не работает. Выдаёт сразу красный треугольник когда его хочешь включить

45j54 2024 年 9 月 12 日上午 4:32

yesh

pyromanuel [作者] 2024 年 7 月 9 日上午 6:59

Hello,
I have just watched your video from Mariupol and it looks great. I could look into curved switches at some point, but i hesitate to promise anyting.

Metathron 2024 年 5 月 4 日下午 1:31

Dear pyromanuel, I like your mod very much, it makes my builds much more realistic, and I can't really build switches without it anymore. You can check what it looks like if you'd like https://youtu.be/CFBMqR9dzOk .
However, because of that I'm a bit restricted with layouts I can build (only 3 strait 190, 300, 500 switches)
So my question is, is it possible to add at least a couple of another variations - blades for curved switches (the ones which can be created with switch kit), for a couple of radiuses like 300 & 500, and maybe also add option for radii 700, to be able to make high speed switches?

pyromanuel [作者] 2024 年 2 月 6 日下午 12:16

As far as I know is it not possible to add a slider since it is a waypoint and not an asset. Wayppoints and signals can't have variables associated with them,