Halaman Toko

Transport Fever 2

Semua Diskusi Screenshot Ilustrasi Siaran Video Workshop Berita Panduan Ulasan

Transport Fever 2 > Workshop > Workshop pyromanuel

83 rating

Blades and levers for switches 1.0

Deskripsi Diskusi1 Komentar20 Catatan Perubahan

Penghargaan

Track/Street: Track

Tag: swedish, waypoint, Switch

Ukuran File

Diposting

6.684 MB

19 Apr 2023 @ 4:24am

1 Catatan Perubahan ( lihat )

9,370	Pengunjung Unik
3,450	Pelanggan Saat Ini
157	Favorit Saat Ini

Berlangganan untuk mengunduh
Blades and levers for switches 1.0

Stop Berlangganan

Deskripsi

Animated switch blades and switch levers.

This is a special waypoint that is used to animate switch blades and switch levers. Put the Waypoint marker at the straight track after the frog. The blades assumes the correct position when the track is reserved for a train in the game. Advantageously used together with Switch Kit DE/AT and is adapted to radii 190, 300 and 500.

Limitations:

Since the blades are built out of waypoints it will only sense trains in one direction. One therefore has to choose which direction the train most likely will come from. Works because of that best on one-way tracks.
Must be built on even ground and not in a bend. If the track is curving immediately after the switch the blades might be shifted sideways
There could be gaps between the blades and the rails of the switch in some cases. Try shifting along the track.

Use at your own risk.

Diskusi Populer Lihat Semua (1)

6 Feb 2024 @ 10:16pm

Height setting

RadiKyle

20 Komentar

< >

Mr.Krash 23 Jan @ 7:03am

Hello. Can't you move the rotation point closer to the switch? This would allow them to be installed on curved sections.

LeonidRUS07 11 Des 2024 @ 3:24pm

этот мод не работает. Выдаёт сразу красный треугольник когда его хочешь включить

45j54 12 Sep 2024 @ 4:32am

yesh

pyromanuel [pembuat] 9 Jul 2024 @ 6:59am

Hello,
I have just watched your video from Mariupol and it looks great. I could look into curved switches at some point, but i hesitate to promise anyting.

Metathron 4 Mei 2024 @ 1:31pm

Dear pyromanuel, I like your mod very much, it makes my builds much more realistic, and I can't really build switches without it anymore. You can check what it looks like if you'd like https://youtu.be/CFBMqR9dzOk .
However, because of that I'm a bit restricted with layouts I can build (only 3 strait 190, 300, 500 switches)
So my question is, is it possible to add at least a couple of another variations - blades for curved switches (the ones which can be created with switch kit), for a couple of radiuses like 300 & 500, and maybe also add option for radii 700, to be able to make high speed switches?

pyromanuel [pembuat] 6 Feb 2024 @ 12:16pm

As far as I know is it not possible to add a slider since it is a waypoint and not an asset. Wayppoints and signals can't have variables associated with them,