Áruházi oldal

Transport Fever 2

Összes Témák Képernyőmentések Alkotások Közvetítések Videók Műhely Hírek Útmutatók Értékelések

Transport Fever 2 > Műhely > pyromanuel Műhelye

83 értékelés

Blades and levers for switches 1.0

Leírás Témák1 Megjegyzések20 Változásjegyzék

Díjazás

Track/Street: Track

Címkék: Svéd, waypoint, Switch

Fájlméret:

Közzétéve:

6.684 MB

2023. ápr. 19., 4:24

1 változásjegyzék ( megnézés )

9,352	egyedi látogató
3,423	jelenlegi feliratkozó
157	ember kedvence jelenleg

Feliratkozás a letöltéshez
Blades and levers for switches 1.0

Feliratkozva

Leiratkozás

Leírás

Animated switch blades and switch levers.

This is a special waypoint that is used to animate switch blades and switch levers. Put the Waypoint marker at the straight track after the frog. The blades assumes the correct position when the track is reserved for a train in the game. Advantageously used together with Switch Kit DE/AT and is adapted to radii 190, 300 and 500.

Limitations:

Since the blades are built out of waypoints it will only sense trains in one direction. One therefore has to choose which direction the train most likely will come from. Works because of that best on one-way tracks.
Must be built on even ground and not in a bend. If the track is curving immediately after the switch the blades might be shifted sideways
There could be gaps between the blades and the rails of the switch in some cases. Try shifting along the track.

Use at your own risk.

Népszerű témák Összes megnézése (1)

2024. febr. 6., 22:16

Height setting

RadiKyle

20 megjegyzés

< >

Mr.Krash jan. 23., 7:03

Hello. Can't you move the rotation point closer to the switch? This would allow them to be installed on curved sections.

LeonidRUS07 2024. dec. 11., 15:24

этот мод не работает. Выдаёт сразу красный треугольник когда его хочешь включить

45j54 2024. szept. 12., 4:32

yesh

pyromanuel [készítő] 2024. júl. 9., 6:59

Hello,
I have just watched your video from Mariupol and it looks great. I could look into curved switches at some point, but i hesitate to promise anyting.

Metathron 2024. máj. 4., 13:31

Dear pyromanuel, I like your mod very much, it makes my builds much more realistic, and I can't really build switches without it anymore. You can check what it looks like if you'd like https://youtu.be/CFBMqR9dzOk .
However, because of that I'm a bit restricted with layouts I can build (only 3 strait 190, 300, 500 switches)
So my question is, is it possible to add at least a couple of another variations - blades for curved switches (the ones which can be created with switch kit), for a couple of radiuses like 300 & 500, and maybe also add option for radii 700, to be able to make high speed switches?

pyromanuel [készítő] 2024. febr. 6., 12:16

As far as I know is it not possible to add a slider since it is a waypoint and not an asset. Wayppoints and signals can't have variables associated with them,