Butikssida
Take On Mars
Alla Diskussioner Skärmbilder Konst Sändningar Filmer Workshop Nyheter Guider Recensioner

Take On Mars

Butikssida
Take On Mars >  Workshop > ErikV70s workshop
Otillräckligt med betyg
PHEV Buggy
Beskrivning Diskussioner0 Kommentarer7 Ändringar
   
Utmärkelse
Favorit
Favoritmarkerad
Avfavoritmarkerad
Item Type: Modification
Dependencies: Standard
Filstorlek
Lades upp
Uppdaterades
406.867 KB
2 jul, 2022 @ 5:12
22 jul, 2022 @ 19:06
14 ändringsnotiser ( visa )
Artiklar som krävs
Denna artikel kräver alla följande artiklar
Skapat av
ErikV70
Offline
Se alla 8 samlingar
244 Unika besökare
113 Nuvarande abonnemang
8 Nuvarande favoriter

Abonnera för att ladda ner
PHEV Buggy

Beskrivning
The buggy is now an PHEV vehicle.

A plugin Hybrid with a 500 Wh battery that can run in 3 modes:
EV - Electrical Vehicle
HYB - Hybrid mode running on battery and ICE
ICE - Running on Internal Combustion Enging and charging the battery.

It can be charged using the Charge Adaptors, which are available in a separate addon "PHEV Charging Adaptors". The adaptors can be printed under Machines/Power. An adaptor should be connected to righthand side of the buggy, just behind the seat. Connect a powered cable and the buggy will recharge.

Adaptor MK1 is cheapest and charge at 1 kW.
Adaptor MK2 is more advanced, charges at 5 kW and allows power supply mode.

I used the connector object from "Resource Cables", which i understand originally was made by ReIterated. This object adds great value, so thanks a lot!

Enjoy
7 kommentarer
< >
ErikV70  [skapare] 19 nov, 2022 @ 18:03 
Yes Knightsleeper, no problem.
Knightsleeper 19 nov, 2022 @ 9:19 
Please help me keep Take On Mars alive.
Knightsleeper 19 nov, 2022 @ 9:17 
Hello my friend. I would like to use your idea in my Take On Mars Rebuild Game Mod. Would this be ok with you?

https://gtm.steamproxy.vip/sharedfiles/filedetails/?id=2464570565
bladerunner97 5 jul, 2022 @ 19:22 
Yay! Thank you very much sir. :steamhappy::coffeeTLD:
ErikV70  [skapare] 5 jul, 2022 @ 13:27 
You have your door back Blade....chargepoint is now on the righthand side. I used the socket-object from Resource Cables and now we can keep the cargo hold clean. It looks much better now.
bladerunner97 5 jul, 2022 @ 8:28 
I vote for having the door back. If possible. If not then no worries. ;)
ErikV70  [skapare] 4 jul, 2022 @ 6:15 
Currently the door is removed to make place for the cable into the low portion of the cargo hold. This I consider the most elegant location for the charge adaptor, while we can see its display. However, I could put the adaptor on top of the cargo hold, and put the door back on. Any preferences?