Tilaa ladataksesi
The Britannia Bridge

[ko-fi.com]

In 1850, one of the greatest bridges the world had ever seen opened over the Menai Strait in North Wales, connecting Anglesey to the Mainland. This was a pioneer, being one of the biggest box girder bridges ever built at the time, with two spans of 140m. The tubular box girder was a rare design, designed by the great Robert Stephenson. The bridge stood almost in as built condition for 120 years, until the tar which was used to cover the inside of the bridge to prevent corrosion was set alight by mischevious youths in 1970. The bridge suffered a massive fire, which severely compromised the integrity of the steel components. The decision was taken to rebuild the spans of the bridge as an arch bridge, and also to install a road deck above the railway level as a new route across the strait to reduce the volume of traffic crossing the narrow Menai Suspension Bridge. The bridge is still in use today, carrying trains to Holyhead on the North Wales Main Line and also the A55 North Wales Road.

- Fully modular system
- Spans are available in the depot menu
- Towers are available in the asset menu

Please note the bridge is only suitable for non-electric vehicles of a size within the UK loading gauge.

This mod was commissioned by sheep21.

Please do not post your requests in the comments, post them here instead:

[ko-fi.com]

Models and textures © 2022 cw_315. All rights reserved. Repaints are not permitted unless stated otherwise. Permission is not granted to re-host or re-release models or textures included in this mod anywhere.