Cities: Skylines

Cities: Skylines

111 평점
RAILWAY 2 - Euro Wooden Station Tracks (Sta. Entry)
   
어워드
즐겨찾기
즐겨찾기됨
즐겨찾기 해제
파일 크기
게시일
업데이트일
423.786 MB
2021년 10월 26일 오전 6시 56분
2023년 1월 25일 오후 9시 30분
업데이트 노트 2개 (보기)

다운로드 위해 구독하기
RAILWAY 2 - Euro Wooden Station Tracks (Sta. Entry)

REV0님의 1 모음집
(R2) RAILWAY 2: Collection
아이템 117개
설명


Railway 2 is a brand new network package which is packed with numerous new features, while maintaining the existing features of original Railway 1 project. It also brings new types of networks such as quads and mainlines. Check Railway 2 Guide in the collection, linked above.


This is a pack of station networks, that can be used with Railway Replacer. Package contains:

All networks in this package respects European standard-entry standards, which are:
Style
Height above rail
Height above surface
Designation
EURO - Standard Entry
760mm / 29.9in over rails
1000mm over surface
"Sp"

I strongly recommend to check the guide for details.

  • 1 Lane, both side boarding
  • 1 Lane, left side boarding
  • 1 Lane, right side boarding
  • 1 Lane, both side boarding - elevated
  • 1 Lane, left side boarding - elevated
  • 1 Lane, right side boarding - elevated
  • 1 Lane, both side boarding - wired
  • 1 Lane, left side boarding - wired
  • 1 Lane, right side boarding - wired
  • 1 Lane, both side boarding - elevated - wired
  • 1 Lane, left side boarding - elevated - wired
  • 1 Lane, right side boarding - elevated - wired
  • 2 Lane
  • 2 Lane, elevated
  • 2 Lane - wired
  • 2 Lane, elevated - wired
  • 4 Lane,
  • 4 Lane - wired
  • 4 Lane, elevated
  • 4 Lane elevated - wired


All Euro wooden tracks recycle texture and materials of track superstructure between each other. All R2 networks recycle ballast, gravel texture and materials, in order to maximize the optimization. Subscribing entire pack of Wooden style cost about 30MB load.


Part of RAILWAY project, thus requires Railway Replacer to customize track props.

Highly recommend to check the complete guide for full features and details.
Check the Complete Guide

Keywords: RAILWAY 2, Wooden, UIC60, rail, sleeper, Switzerland, Schweiz, Suisse, Europe, Europa, Germany, Deutschland, Italy, Italia, France
댓글 16
REV0  [작성자] 2023년 1월 25일 오후 9시 30분 
Update:
Fixed train stop behavior on 2x2 and 4x2 station tracks
pavidum 2022년 8월 7일 오후 5시 37분 
I will give that a shot, thanks so much! And thanks for all the amazing contributions to this community :)
REV0  [작성자] 2022년 8월 7일 오후 3시 57분 
hold down shift key to assign stop to other lane
pavidum 2022년 8월 7일 오후 3시 13분 
I'm talking about the two lane, standard elevation station track
REV0  [작성자] 2022년 8월 7일 오후 2시 37분 
well if you're using both side entry 1 lane tracsk, then you'll need pedestrian paths attached to both side of the one lane track for both side to be used by people when it's needed.

or are you talking about 2 lane tracks ?
pavidum 2022년 8월 7일 오후 2시 22분 
They should be - I replaced vanilla/premade station tracks with this one. Unless, I need to manually add a pedestrian path, in addition to the original construction of the station
REV0  [작성자] 2022년 8월 7일 오후 2시 20분 
are both sides of the track are connected to a road or pedestrian path ?
pavidum 2022년 8월 7일 오후 2시 12분 
Hi there- I'm not sure what exactly is going on, but using the both side boarding, I am only able to add stops to a line on one side of the track. Any help would be appreciated!
REV0  [작성자] 2022년 3월 3일 오후 9시 39분 
Cargo tracks are same tracks as passenger tracks
笨蛋車掌 2022년 3월 3일 오후 4시 37분 
Wish you have some cargo station track, that would be beautiful.:steamhappy: