Kauppasivu
Transport Fever 2
Kaikki Keskustelut Kuvakaappaukset Taideteokset Suoratoistot Videot Workshop Uutiset Oppaat Arvostelut

Transport Fever 2

Kauppasivu
Transport Fever 2 >  Workshop > Käyttäjän 彬伐 Workshop
63 arvostelua
[CRF_NX_3] DL1 large precast beam transport waggon
Kuvaus Keskustelut0 Kommentit9 Muutokset
   
Palkinto
Lisää suosikkeihin
Lisätty suosikkeihin
Poista suosikeista
Vehicle: Wagon
Tunnisteet: China, precast beam
Tiedostokoko
Julkaistu
Päivitetty
72.137 MB
27.8.2020 klo 6.36
10.8.2022 klo 2.33
9 muutosilmoitusta ( näytä )
Vaaditut luomukset
Tämä luomus vaatii kaikki seuraavat luomukset
Tekijä
彬伐
Kirjautunut ulos
Näytä kaikki 782 kokoelmaa, tekijöinä 彬伐 ja muut henkilöt
10,411 Uniikkeja kävijöitä
6,398 Nykyiset tilaajat
207 Nykyiset suosikit

Tilaa ladataksesi
[CRF_NX_3] DL1 large precast beam transport waggon

1 kokoelmassa, tekijä 彬伐
中国铁路货运车辆合辑
18 luomusta
Kuvaus
The 32-meter precast beam that can support trains running at 200km/h weighs 147 tons. No carriage can meet the transportation requirements in the past. Therefore, CRRC has developed a new transport vehicle to transport extremely heavy precast beams.
This wagon can run at a speed of 120km/h when it is not loaded with precast beams, but after it is loaded with precast beams, the speed is lower than 50km/h to ensure safe operation. In addition, after loading the prefabricated beam, it is impassable for corners with too small radius.

-------------------------------------------------- ------------------------------
DL1 2006-
Type of goods: building materials
Lifespan: 30 years
Carrying capacity: 147 tons (37 in the game)
Top speed: 120km/h
-------------------------------------------------- ------------------------------

9 kommenttia
< >
ctc1224hk 5.5.2022 klo 7.06 
你好dalao，是这样的，可否请你再次上传一下mods"160kph T-beam bridge of China Railway"到steam來呢?因为我这边失去了这个mods后就一直不能读档进行游戏了,万分感谢.
Exo_Atami_122 27.6.2021 klo 1.44 
Any chance you can release it so it can be used as an asset?
Please please please...
tom13 2.4.2021 klo 13.30 
I just found out the error: The wagon was not loaded to 100% and it seems like the precast beem is only shown when it is loaded to 100%. That is why I never saw the beam before. I think it would be better if it was already there from 1%, but this is your decission as it is your mod
彬伐  [tekijä] 1.4.2021 klo 3.19 
@tom13 Please move your view closer to the carrier and see if the support frames shift properly from slack to upright mode
tom13 1.4.2021 klo 2.58 
Yes, the support brackets are there, but no precast beam
彬伐  [tekijä] 1.4.2021 klo 2.39 
@tom13 Is the support bracket normal? Support brackets are also considered as cargo in the script.
tom13 1.4.2021 klo 2.28 
Somehow my wagons remain without the precast beam on them, even when I can see that they are loaded with goods
aykutkansu 26.9.2020 klo 14.36 
I love this.
Relod兔子 29.8.2020 klo 21.48 
能不能做一个神华的神华号