Abonează-te pentru a descărca
Star Trek Jump Drive Lines

The double line placements are guessed based on your ship dimensions. To fix the lines to specific points on your ship (e.g. place it at warp nacelles etc), put the following Name Tag in the Name Field of a particular Thruster you want the line to be on:

JDL-L <= Aligns the Left Line on this Thruster
JDL-R <= Aligns the Right Line on this Thruster

Note: MUST be a Thruster Type. You can only have one for each (i.e. one left and one right). Tagging multiple thrusters to one name tag will cause mod to randomly pick one.


By default, the double line placements are guessed based on your ship dimensions. You can change that by specifying up to 7 warp lines on specific Thrusters by putting the following Name Tag on the name of the thruster:

JDL-

(Example: JDL-M, JDL-1, JDL-2.... etc)

Note: MUST be a Thruster Type. If you have more than 7 thrusters tagged, script will just use the first 7 detected.

Thruster lines on subgrid is now supported.



You can use the following controls to set the warp effect colors (there is a cooldown of 2 seconds before you are allowed to click the button again):



This results in the mod setting the following Custom Data to ALL Jump Drives on the grid:



The Thruster Glow, Warp Lines and Boom will use the new color set:



Note: You cannot set too dark a color (e.g. Black). Mod will re-adjust the color to ensure it glows.