Transport Fever 2

Transport Fever 2

61 평점
UK 3rd rail track speeds - Electrified - No Catenary - MPH
   
어워드
즐겨찾기
즐겨찾기됨
즐겨찾기 해제
Track/Street: Track
파일 크기
게시일
업데이트일
2.942 MB
2020년 3월 25일 오전 9시 14분
2021년 4월 6일 오전 6시 40분
업데이트 노트 2개 (보기)

다운로드 위해 구독하기
UK 3rd rail track speeds - Electrified - No Catenary - MPH

설명
This mod lets you place speed limited 3rd rail track

Note:
I originally did this mod as a favour for someone.
I wish I hadn't - its the one that has given me more grief - usually caused by people not reading this.
So I hid this mod. I no longer support this mod - if it does something you don't like then don't use it.

This mod works but is troublesome mainly because its fighting with how the game sees electrified tracks.
If you use this and have issues I don't have a fix for you.


the speeds line up with CW315's UK speed boards

It requires Agaohonoh's excellent third rail mod

However - This mod does place properly electrified track and does remove the catenary.

Note:
Everyone should be aware what is going on here. Because of how the game is designed. I think it sees catenary as a switch to say the line is electrified. To me that's an error because A does not = B. However that is how the game sees things. So this mod defines a new track type and gives it microscopic catenary.
This works 90% of the time.
It doesn't work when you place the 3rd rail track next to non 3rd rail track. The game ignores directions and draws normal size catenary back in.

(It doesn't work with some stations. )

This mod now also has 'old 3rd rail' as well as 'high-speed 3rd rail' (06/04/2021)

The only true solution is for Urban to define an electrified track type that doesn't have catenary and then we can move forward. Until then this is probably the best you are going to get ;)
댓글 27
N0neGiv3N 2025년 5월 27일 오후 8시 43분 
@Pizzaguy, You can create your own by subscribing to Agaohonoh's US Third Rail tracks instead.

Afterwards, you want to go into the configuration files for this mod and change one for every track file.

At the bottom of the text file, update the following information:

t.sleeperModel = "railroad/agohonoh/single_sleeper_3rdRail_hs.mdl"
t.trackStraightModel = {
"railroad/agohonoh/2m_3rdRail_hs.mdl",
"railroad/agohonoh/4m_3rdRail_hs.mdl",
"railroad/agohonoh/8m_3rdRail_hs.mdl",
"railroad/agohonoh/16m_3rdRail_hs.mdl",
}

This will substitute all of the UK Third Rail models to be the USA Versions. You're Welcome and Enjoy.
Pizzaguy 2025년 5월 1일 오후 5시 29분 
is there a USA version
JO4K 2025년 1월 24일 오전 5시 38분 
It’s back, thank you so much
E.RAW 2025년 1월 15일 오후 2시 47분 
So while I absolutely love this mod, I have decided that I needed to find a better way to utilise the 3rd rail into the map, without the clipping at junctions and on level crossings. Can't believe I didn't think of it sooner. I have just changed the specs of the 3rd rail trains in the game files from Electric to Diesel trains. Now I can set up the line un-electrified and add in the wonderful 3rd rail model when suitable. This is so much cleaner and much easier when placing stations as you can use the pre-made ones from workshop :steamhappy:
Bosh 2024년 9월 24일 오후 3시 17분 
im tryna get this to work but it says the route isnt electrified
TomNewJelly 2024년 8월 31일 오전 1시 27분 
im also getting it, tried replacing section of track with this so i didnt have overhead cables and i get an error saying the route isnt electrified.
Mad Hatter  [작성자] 2024년 8월 30일 오전 6시 54분 
hmmm okay replicated it.
SteelRodent 2024년 8월 30일 오전 2시 31분 
Unless some of the trains that are made for 3rd rail power breaks it, I don't know what to tell you. Only tested with this mod and trains that need it, nothing else enabled. Will have to test again once I get around to doing UK stuff again. May just be some specific trains that break it
Mad Hatter  [작성자] 2024년 8월 17일 오전 12시 38분 
it does work in stations. Try it in a vanilla station for starters. If it was working and 'suddenly stopped' working then check which mods you recently added.
There was a point when vanilla stations would not accept custom tracks but urban fixed that. There are some mods that predate that fix that effectively 'undo the fix'.
SteelRodent 2024년 3월 27일 오후 4시 03분 
these don't work through stations anymore. The game flat out refuses to accept the station modules as electrified