Butiksside
Stormworks: Build and Rescue
Alt Diskussioner Skærmbilleder Illustrationer Broadcasts Videoer Værksted Nyheder Guider Anmeldelser

Stormworks: Build and Rescue

Butiksside
Stormworks: Build and Rescue >  Værksted > esas værksted
Ikke nok vurderinger
Helicopter altitude hold
Beskrivelse Diskussioner0 Kommentarer7 Ændringsbemærkninger
   
Pris
Føj til foretrukne
Gjort til foretrukken
Fjern som foretrukken
Vehicles: Air
Microcontrollers: Navigation, Microcontroller
Tags: v0.9.19
Filstørrelse:
Offentliggjort:
19.285 KB
20. dec. 2019 kl. 3:08
1 ændringsbemærkning ( vis )
Designet af:
esa
Offline
Se alle 23 samlinger (nogle kan være skjulte)
781 Unikke besøgende
537 Nuværende abonnenter
8 Nuværende foretrukne

Abonner for at downloade
Helicopter altitude hold

Beskrivelse
Just a simple altitude hold for helicopters.
SIZE:
3x2
Logic connections:
Altitude hold toggle input
Altitude sensor input
Desired altitude input
Collective input
Collective output

You can use this in your creations, but remember to credit me.
And lastly, have fun!
7 kommentarer
< >
esa  [ophavsmand] 8. mar. 2021 kl. 23:44 
Okay, thanks for the feedback, I might do that at some point. Right now I really donä't have interest in Stormworks. But thanks for the feedback!:Khappy:
PinkTurkey 8. mar. 2021 kl. 17:24 
mine does use two gyros to stabilize, so it could just be that
PinkTurkey 8. mar. 2021 kl. 17:22 
very good altitude hold. one thing i would suggest is limiting the collective depending on how fast you are going. my helicopter runs off a propeller and a jet and it overshoots the target a little bit
esa  [ophavsmand] 31. dec. 2020 kl. 5:04 
Nice to hear that this helped:)
goonicide 30. dec. 2020 kl. 16:32 
THANK YOU IVE BEEN LOOKING FOR ONE OF THESE FOR SO LONG FOR MY CARRER HELI
esa  [ophavsmand] 14. dec. 2020 kl. 23:02 
You put the up/down from the seat to the collective input and the collective output to the gyro and from the gyro to the rotor.
oHantuss 14. dec. 2020 kl. 21:35 
Where do i put the collective input and output thats all Thanks