Trang cửa hàng
Medieval Engineers
Tất cả Thảo luận Ảnh chụp Tranh ảnh Phát sóng Video Workshop Tin tức Hướng dẫn Đánh giá

Medieval Engineers

Trang cửa hàng
Medieval Engineers >  Workshop > Workshop của peaceman
56 lượt đánh giá
Water Propellers
Mô tả Thảo luận0 Bình luận71 Ghi chú thay đổi
   
Giải thưởng
Yêu thích
Đã yêu thích
Bỏ thích
Type: Mod
Mod category: block, script
Version: 0.7
Kích cỡ file
Đã đăng
Đã cập nhật
5.256 MB
24 Thg11, 2018 @ 5:47pm
28 Thg02 @ 1:49pm
31 ghi chú thay đổi ( xem )
Nội dung yêu cầu
Nội dung này yêu cầu cần có các nội dung khác như sau
Tạo bởi
peaceman
Trên mạng
onca77
Rời mạng
Xem tất cả 201 bộ sưu tập (một số có thể bị ẩn)
4,764 Số khách thăm độc nhất
4,065 Người đăng ký hiện tại
130 Lượt yêu thích

Đăng ký để tải xuống
Water Propellers

Mô tả
This mod adds Bronze Propellers to be used in water.

There are 4 different propeller sizes from Small to Huge
Recommended is to use Steam engines or Clang to power your propellers.

For survival these are unlocked with the windmill and mechanical blocks research.
You craft them by making clay molds and fill them with bronze

Have fun with these !

If you like my mods, feel free to send me some love -> [www.paypal.com]
71 bình luận
< >
peaceman  [tác giả] 17 Thg05, 2022 @ 11:58am 
For anyone wondering, the problem was too little engine power. I updated the recommended horsepower for each prop
peaceman  [tác giả] 12 Thg05, 2022 @ 1:02pm 
Should not be required. If you can't fix your problem you could send me a blueprint and I can have a look
the smell of bacon 9 Thg05, 2022 @ 5:07am 
Should I have a catch block to support the weight of it? I just had it placed on a steel tube directly in line with the engine. Blueprinted ships I see in workshop have pulley+catch block systems. I was just worried about doing that because I haven't tested catch blocks much since the CE update
peaceman  [tác giả] 7 Thg05, 2022 @ 12:50pm 
Make sure the prop is not colliding with something. That is definitely not normal. I can run it perfectly fine myself
the smell of bacon 6 Thg05, 2022 @ 3:27pm 
maybe 1 rpm
peaceman  [tác giả] 6 Thg05, 2022 @ 2:52pm 
It should work with a large prop. How much rpm are you getting?
the smell of bacon 6 Thg05, 2022 @ 1:54am 
I have a huge engine sunk below the water line (with an air-compressor) and water/oil inputs, but I cant seem to turn a large propeller with it? Medium propeller works fine but looks really wonkey on a ~200 foot boat. The huge engine says it makes 2680 horse power, and the large propeller says it needs 50-300 horsepower? It feels like there should be something in-between 250kg and 3000kg. Unless I'm doing something wrong? I've tried steel tube and round timber for connection, don't want to mess around with catch blocks on DS
kcs123 25 Thg01, 2021 @ 2:53pm 
I have attempted to attach huge propeller to 2x2 size axle. But it can't be attached to center, because it was made before pulley and more catch block mod is made.

It looks slightly odd for huge propeller to attach on 1x size axle, but it works. It would be nice to have pulley that can be attached to 2x2 size axle and propellers too, though.

Ship example with huge propeller: https://gtm.steamproxy.vip/sharedfiles/filedetails/?id=2373845027

Not quite aestetic ship, but it is usable and can be easy reconfigured. I think that I have near limit how fast ship can be with single propeller ~120 km/h . Additional engine seems that does not help much, just make things even more unstable.
peaceman  [tác giả] 6 Thg02, 2020 @ 1:11pm 
the loss is probably countered by the power increase by having a much smaller shaft. The length does not only cause big rotation loss but also its diameter
Obamnana 6 Thg02, 2020 @ 1:06pm 
that is if you set them up perfectly so that the grids are orientated exactly the same