Mağaza Sayfası
Medieval Engineers
Tümü Tartışmalar Ekran Görüntüleri Çizimler Yayınlar Videolar Atölye Haberler Rehberler İncelemeler

Medieval Engineers

Mağaza Sayfası
Medieval Engineers >  Atölye > peaceman Kullanıcısının Atölyesi
56 oy
Water Propellers
Açıklama Tartışmalar0 Yorumlar71 Değişiklik Notları
   
Ödül
Favorilere Ekle
Favorilere Eklendi
Favorilerden Çıkar
Type: Mod
Mod category: block, script
Version: 0.7
Dosya Boyutu
Gönderilme
Güncellenme
5.256 MB
24 Kas 2018 @ 17:47
28 Şub @ 13:49
31 Değişiklik Notu ( görüntüle )
Gerekli öğeler
Bu öğe aşağıdaki diğer tüm öğelere ihtiyaç duymaktadır
Oluşturan
peaceman
Çevrimdışı
onca77
Çevrimdışı
201 koleksiyona göz atın (bazıları gizli olabilir)
4,764 Tekil Ziyaretçi
4,065 Mevcut Abone
130 Mevcut Favoriler

İndirmek için abone ol
Water Propellers

Açıklama
This mod adds Bronze Propellers to be used in water.

There are 4 different propeller sizes from Small to Huge
Recommended is to use Steam engines or Clang to power your propellers.

For survival these are unlocked with the windmill and mechanical blocks research.
You craft them by making clay molds and fill them with bronze

Have fun with these !

If you like my mods, feel free to send me some love -> [www.paypal.com]
71 Yorum
< >
peaceman  [yaratıcı] 17 May 2022 @ 11:58 
For anyone wondering, the problem was too little engine power. I updated the recommended horsepower for each prop
peaceman  [yaratıcı] 12 May 2022 @ 13:02 
Should not be required. If you can't fix your problem you could send me a blueprint and I can have a look
the smell of bacon 9 May 2022 @ 5:07 
Should I have a catch block to support the weight of it? I just had it placed on a steel tube directly in line with the engine. Blueprinted ships I see in workshop have pulley+catch block systems. I was just worried about doing that because I haven't tested catch blocks much since the CE update
peaceman  [yaratıcı] 7 May 2022 @ 12:50 
Make sure the prop is not colliding with something. That is definitely not normal. I can run it perfectly fine myself
the smell of bacon 6 May 2022 @ 15:27 
maybe 1 rpm
peaceman  [yaratıcı] 6 May 2022 @ 14:52 
It should work with a large prop. How much rpm are you getting?
the smell of bacon 6 May 2022 @ 1:54 
I have a huge engine sunk below the water line (with an air-compressor) and water/oil inputs, but I cant seem to turn a large propeller with it? Medium propeller works fine but looks really wonkey on a ~200 foot boat. The huge engine says it makes 2680 horse power, and the large propeller says it needs 50-300 horsepower? It feels like there should be something in-between 250kg and 3000kg. Unless I'm doing something wrong? I've tried steel tube and round timber for connection, don't want to mess around with catch blocks on DS
kcs123 25 Oca 2021 @ 14:53 
I have attempted to attach huge propeller to 2x2 size axle. But it can't be attached to center, because it was made before pulley and more catch block mod is made.

It looks slightly odd for huge propeller to attach on 1x size axle, but it works. It would be nice to have pulley that can be attached to 2x2 size axle and propellers too, though.

Ship example with huge propeller: https://gtm.steamproxy.vip/sharedfiles/filedetails/?id=2373845027

Not quite aestetic ship, but it is usable and can be easy reconfigured. I think that I have near limit how fast ship can be with single propeller ~120 km/h . Additional engine seems that does not help much, just make things even more unstable.
peaceman  [yaratıcı] 6 Şub 2020 @ 13:11 
the loss is probably countered by the power increase by having a much smaller shaft. The length does not only cause big rotation loss but also its diameter
Obamnana 6 Şub 2020 @ 13:06 
that is if you set them up perfectly so that the grids are orientated exactly the same