Obchod
Medieval Engineers
Vše Diskuze Snímky obrazovky Obrázky Přenosy Videa Workshop Novinky Návody Recenze

Medieval Engineers

Obchod
Medieval Engineers >  Workshop > Workshop uživatele peaceman
56 hodnocení
Water Propellers
Popis Diskuze0 Komentáře71 Poznámky ke změnám
   
Ocenit
Přidat do oblíbených
Oblíbeno
Odebrat z oblíbených
Type: Mod
Mod category: block, script
Version: 0.7
Velikost souboru
Přidáno
Aktualizováno
5.256 MB
24. lis. 2018 v 17.47
28. úno. v 13.49
Poznámky ke změnám (31) – zobrazit
Vyžadované položky
Tato položka ke svému správnému fungování vyžaduje všechny následující položky:
Vytvořil
peaceman
Offline
onca77
Offline
Prohlédněte si všechny kolekce (201), z nichž některé mohou být skryté
4,764 unikátních návštěvníků
4,065 odběratelů
130 přidání do oblíbených

Klikněte na „Odebírat“ pro stažení položky
Water Propellers

Popis
This mod adds Bronze Propellers to be used in water.

There are 4 different propeller sizes from Small to Huge
Recommended is to use Steam engines or Clang to power your propellers.

For survival these are unlocked with the windmill and mechanical blocks research.
You craft them by making clay molds and fill them with bronze

Have fun with these !

If you like my mods, feel free to send me some love -> [www.paypal.com]
Počet komentářů: 71
< >
peaceman  [autor] 17. kvě. 2022 v 11.58 
For anyone wondering, the problem was too little engine power. I updated the recommended horsepower for each prop
peaceman  [autor] 12. kvě. 2022 v 13.02 
Should not be required. If you can't fix your problem you could send me a blueprint and I can have a look
the smell of bacon 9. kvě. 2022 v 5.07 
Should I have a catch block to support the weight of it? I just had it placed on a steel tube directly in line with the engine. Blueprinted ships I see in workshop have pulley+catch block systems. I was just worried about doing that because I haven't tested catch blocks much since the CE update
peaceman  [autor] 7. kvě. 2022 v 12.50 
Make sure the prop is not colliding with something. That is definitely not normal. I can run it perfectly fine myself
the smell of bacon 6. kvě. 2022 v 15.27 
maybe 1 rpm
peaceman  [autor] 6. kvě. 2022 v 14.52 
It should work with a large prop. How much rpm are you getting?
the smell of bacon 6. kvě. 2022 v 1.54 
I have a huge engine sunk below the water line (with an air-compressor) and water/oil inputs, but I cant seem to turn a large propeller with it? Medium propeller works fine but looks really wonkey on a ~200 foot boat. The huge engine says it makes 2680 horse power, and the large propeller says it needs 50-300 horsepower? It feels like there should be something in-between 250kg and 3000kg. Unless I'm doing something wrong? I've tried steel tube and round timber for connection, don't want to mess around with catch blocks on DS
kcs123 25. led. 2021 v 14.53 
I have attempted to attach huge propeller to 2x2 size axle. But it can't be attached to center, because it was made before pulley and more catch block mod is made.

It looks slightly odd for huge propeller to attach on 1x size axle, but it works. It would be nice to have pulley that can be attached to 2x2 size axle and propellers too, though.

Ship example with huge propeller: https://gtm.steamproxy.vip/sharedfiles/filedetails/?id=2373845027

Not quite aestetic ship, but it is usable and can be easy reconfigured. I think that I have near limit how fast ship can be with single propeller ~120 km/h . Additional engine seems that does not help much, just make things even more unstable.
peaceman  [autor] 6. úno. 2020 v 13.11 
the loss is probably countered by the power increase by having a much smaller shaft. The length does not only cause big rotation loss but also its diameter
Obamnana 6. úno. 2020 v 13.06 
that is if you set them up perfectly so that the grids are orientated exactly the same