Trang cửa hàng
Space Engineers
Tất cả Thảo luận Ảnh chụp Tranh ảnh Phát sóng Video Workshop Tin tức Hướng dẫn Đánh giá

Space Engineers

Trang cửa hàng
Space Engineers >  Workshop > Workshop của ella the catgirl
25 lượt đánh giá
Docking Computer
Mô tả Thảo luận0 Bình luận28 Ghi chú thay đổi
   
Giải thưởng
Yêu thích
Đã yêu thích
Bỏ thích
Type: IngameScript
Kích cỡ file
Đã đăng
4.305 KB
11 Thg09, 2018 @ 4:44pm
1 ghi chú thay đổi ( xem )
Tạo bởi
ella the catgirl
Rời mạng
Xem tất cả 63 bộ sưu tập (một số có thể bị ẩn)
2,494 Số khách thăm độc nhất
614 Người đăng ký hiện tại
51 Lượt yêu thích

Đăng ký để tải xuống
Docking Computer

Mô tả
Dutomatically transits and docks your ships. Allows you to set up multiple destinations and undock/transit/dock between them. Don't forget to rate this script.

HOW TO USE

* You need to put a [dock] tag in the name of a remote control and a connector.
* To add a dock, dock at a docking port
* then run the script with the argument "save <dock name>"
* To transit to a place run the script with the argument "goto <dockname>"
* To cancel transit/docking run the script with the argument "stop"
*
* You can change the settings of each individual dock by viewing the custom data of the programmable block
* Here are the settings:
*
* ParkDistance - How far away from the docking port to target the autopilot.
* UndockDistance - How far to move the ship from the docking port after undocking it.

Other fun things:

Put [dock] on a sound block to make it play while docking. Put "The Blue Danube" on it for extra fun!
28 bình luận
< >
hampson.jeffrey 10 Thg10, 2023 @ 6:55pm 
OK, I LOVE this.
and the fact it STILL works despite all keen updates is awesome!
My only question is can it be used with multiple connectors/docks?
(Dock at X with connector X, Dock at Y with connector Y?)
(ingot/ore transport)
Ziku 4 Thg02, 2021 @ 8:32am 
Two questions:
Is it possible to make ship just land at desired location (like on platform without docking)?
Is it possible to use different connectors for different 'saves' (docking locations)?
Anachronism 10 Thg09, 2020 @ 3:36am 
To elaborate, I have a small subgrid with all my programs on it to save space for a droneship. I've dubbed it the 'AI Core'. The remote control is on the main grid with the thrusters, the program is on the 'AI Core'. Can this work in any regard? I've tried to put [dock] at the end of the RC's name but it still does not recognize it. Even after recompiling.
Anachronism 10 Thg09, 2020 @ 3:34am 
Can this be placed on a subgrid and still work without having some other script like Whip's Rotor Thrusters?
MiguelRPG 24 Thg06, 2020 @ 7:46am 
I'm using on my automatic grinder ship :selike:
https://gtm.steamproxy.vip/sharedfiles/filedetails/?id=2139853736
Shinoshi 30 Thg12, 2019 @ 9:53pm 
also would be nice if there was a way to use jump drives, like if distance greater than 40km and there is a jump drive on the grid select some coord. and jump. donno if this is even possible to do
Shinoshi 30 Thg12, 2019 @ 9:49pm 
would like to see a reduced speed on final approach after alignment ( i use a piston and merge block to dock and keep grids seperate.) [ as i approach a connector, a sensor extends a piston with a merge block on it, then if this script slows down the approach it would merge, and sensor does not detect subgrid, so it retracts till it is stopped by connector] lock the connector, and docked no damage(usually).
Erathanos 10 Thg08, 2019 @ 6:08pm 
The rest of it works well enough. :steamfacepalm:
Erathanos 10 Thg08, 2019 @ 6:07pm 
wanting to add, ( even though I thought it didn't need to be mentioned )
Switch lock on a connector also nothing..

Going to have to assume that aspect either does not work, or it simply does not work..
I know that sounds like the exact same thing, but it isn't.
Erathanos 6 Thg08, 2019 @ 6:56pm 
How does one trigger the undock, even after adding "UndockDistance=50"
switch locking the connector does nothing
running the goto name simply redocks it
hitting stop argument.. nothing
making an undock run command.. nothing

heh, thanks :steamhappy: