Stormworks: Build and Rescue

Stormworks: Build and Rescue

E1435 Class "Galaxy" Multi-purpose Rescue Vessel
31 kommentarer
nongboii 9. sep. 2021 kl. 18:11 
ok
Daquan Baton  [ophavsmand] 8. sep. 2021 kl. 10:37 
Point at whatever you want to focus on, then activate tracker mode. The camera will "track" the target.
nongboii 7. sep. 2021 kl. 21:33 
what does the Tracker Mode on the camera do?
Daquan Baton  [ophavsmand] 10. aug. 2021 kl. 21:29 
Literally directly in front of the equipment hatches. The ports for diesel fuel are bright orange with an also bright orange arrow pointing right at it. The arrow even says "DIESEL ONLY" when you look at it...
joseph 10. aug. 2021 kl. 18:18 
wheres the fuel port?
sovietmusiclover 7. aug. 2021 kl. 8:11 
this is really well made, so far i have no problems with it.
Daquan Baton  [ophavsmand] 14. juni 2021 kl. 17:01 
I don't think there's much more that I can do about it, sorry.
Daquan Baton  [ophavsmand] 14. juni 2021 kl. 16:59 
That's odd, the ship worked just fine not too long ago. I'd contribute the issue to one of the recent updates, most likely they tweaked something with the engines and now their full power has been reduced. I've resolved the problem, but unfortunately now the ship is at least 9 km/h slower, maxing out at around 41 km/h.
Enthusiastic Cacti 13. juni 2021 kl. 21:46 
I noticed the ship wont go into high gear. It will only hang out in the middle gear giving me a top speed of 30 kmh. Is there a button or switch that I missed? The throttle is at max with all 4 engines turned on.
Daquan Baton  [ophavsmand] 22. maj 2021 kl. 13:12 
No problem.
FattyBeardy 22. maj 2021 kl. 8:22 
I cant believe I missed the controller. Its right in front of my face. Thanks so much.
Daquan Baton  [ophavsmand] 21. maj 2021 kl. 17:48 
Thank you, as for the turret, it's controlled by a remote controller directly underneath it, shouldn't be hard to miss, just take a look.

There's an indicator sign directly underneath it that when observed with detailed labels on, you'll see that it says "CH-1, w/s, a/d, 1".
FattyBeardy 21. maj 2021 kl. 14:55 
Cant get the water turret to work up front but otherwise amazing ship
Daquan Baton  [ophavsmand] 15. maj 2021 kl. 15:39 
You don't need the electrical anchors to charge the helicopter, the electrical connectors at the bottom of the helicopter, that also act as the locking mechanism to keep the helicopter glued to the helipad's own electrical connectors do that already. The power of the helicopter will automatically level out to the same as it's mother ship, so if the ship is at 98, and the heli is at 94, then the ship will transfer power to the heli until their power matches. This only goes one way though, so if the heli has more power than the ship, then the heli will not charge the ship's batteries.

If the ship is running low on power, then it has a generator that can be manually controlled through the bridge or engine room to generate the wanted amount of power via a separate throttle (explore the bridge), although the main engines have their own smaller generators that slightly balance out the power consumption when moving at full speed.
Voidless 15. maj 2021 kl. 9:55 
I was also wondering where the power anchor on the heli pad is. I try to plug in the helicopter to charge but I cant find the power anchor? I only see the fuel anchor in the back to refuel it?
Voidless 14. maj 2021 kl. 19:53 
It's alright, I love the ship so much! Its perfect for rescue missions!
Daquan Baton  [ophavsmand] 14. maj 2021 kl. 18:58 
If you look inside of the helicopter, you'll see it's stuffed with logic, so unfortunately there's just no room left in it. The ship has a fuel tank dedicated for jet fuel for the helicopter's turbine, it's located on the helipad behind the helicopter.

The anchor extension length is limited by the type of winch used, so in order to have the anchor extend further, I would have to put a larger winch on the front, which I tried, but it didn't look good. Though the anchor should be long enough, it was meant to be used near land, or connected to another ship that you don't want to drift away from while doing something near it, not to anchor you in the middle of the ocean.
Voidless 14. maj 2021 kl. 11:34 
Also can you make the anchor cable longer, almost everywhere I go it isn't close to touching the ground.
Voidless 14. maj 2021 kl. 11:20 
I know its a small helicopter, but is there anyway you can improve its fuel capacity, it runs out of fuel so quickly...?
Daquan Baton  [ophavsmand] 13. maj 2021 kl. 16:50 
Thank you.
Chroute 13. maj 2021 kl. 6:42 
Just wanted to say this is a fantastic ship. Easy to use and very convenient for missions. Thanks ;)
Tirpitz 12. maj 2021 kl. 0:34 
Awesome. thanks
Daquan Baton  [ophavsmand] 11. maj 2021 kl. 23:36 
Roger, that was on my end, sorry. Problem now fixed.
Tirpitz 11. maj 2021 kl. 22:26 
Okay. because for some reason I ran out of fuel and it wouldn't switch over.
Daquan Baton  [ophavsmand] 11. maj 2021 kl. 19:00 
Empty out the secondary fuel tank in the editor and you'll see.
Daquan Baton  [ophavsmand] 11. maj 2021 kl. 18:59 
Automatically, the secondary drains first, then the primary.
Tirpitz 11. maj 2021 kl. 8:23 
Is it supposed to switch over automatically or is there a button?
Daquan Baton  [ophavsmand] 11. maj 2021 kl. 8:13 
Yes the secondary tank will drain first because it's smaller, then the primary. This was intended.
Tirpitz 10. maj 2021 kl. 23:39 
For some reason it's draining from the secondary tank first and I can't seem to find how to switch between tanks
Daquan Baton  [ophavsmand] 10. maj 2021 kl. 8:37 
Thanks, as for the autopilot, it isn't mine but it works very simply. Just place a waypoint on the map, input its coordinates into the large keypad, then activate the autopilot. If you do everything in that order then the autopilot should steer the ship towards the waypoint and stay on course.

The autopilot doesn't have obstacle avoidance, if that's what you're referring to.
andrewworld 10. maj 2021 kl. 7:16 
Hi, The Overall ship is wonderful. The Autopilot is a bit odd when it comes to tracking the right path