Illegal money laundering technique

Thank you for making the pillars available as assets! :)

这个资产是国人大佬做的还是外国大佬做的？？进去全是英文。。。。。。。。看介绍又感觉是国人做的，进去一看又感觉是国外大佬做的。感觉比A佬的CSUR还要难。。。。。。。。

For some reason, it is allowing me to use this bridge with railways, but I can't find it in the bridge menu.

桥墩的话设计个T字型呗，更真实一点，现在的高架用双车道都有翻的感觉。然后能否设计个“ 井 ”、“ 艹 ”字型的路口，现有体系下的井字路口拥有4个红绿灯，对于交通可没有太大的好处

@alex.lsk.kalinin I tested the bridge on my own save. It shouldn't be missing. Also the tunnels and other stuff such as my 2nd Yangtze River Bridge will be upgraded during winter holiday because I have been very busy in this term. No saves will be broken, but the tunnel and 2nd Yangtze River Bridge will be temporarily unusable.

Why the bridge is missing and the tunnel is also not working. When will you fix the error??? Many people's saves are flying

in General, I do not know what the problem is. it's just that your design doesn't break or change

I understand that the overpass pillars are to blame, they are poorly optimized and there is a problem with the pillars

The video is fine, but I don't understand the language so I don't understand your problem. Change language to English and send the video again.

https://c.radikal.ru/c28/2010/bb/f668f08027b3.jpg , https://c.radikal.ru/c21/2010/aa/d9ecf04b863a.jpg does your game have a similar situation?

can you tell me what to do? how to break an overpass

https://youtu.be/lh6xLXubaKw - IT'S CLEAR TO ME - IT'S THE PILLARS

@Patrit_08 I would recommend you to record a video of you trying to alter the overpass and upload it to youtube and send a link to me. I don't really get what you are talking about. Those are clearly translated English and the translation isn't very well.

cloverleaf interchange, very small diameter

the interchange is too tight, and the settings of the supports do not allow you to demolish the overpass from any tail

if it was possible to make an overpass without a support one, without breaking the overpass, in this case the problem will be solved, but as long as there are no such settings, the problem will be.

it's all about setting up the overpass support

and it is not possible to carry off any tail

these collisions are your overpass supports that do not move during demolition, that is, they may move, but the amplitude ( distance) of their movement is not sufficient for dense development of the interchange, in General, with a dense - close interchange, the overpass closes on its supports, and it is not possible to transfer it to a non-supporting overpass without demolition. these are the settings of the supports , you know what I mean? and in addition to the interchange of your same overpass, there is nothing and does not interfere. that is, the overpass prevents itself from collapsing, and closes itself. I hope you understand

@Patrit_08 Oh I know what happened. The game checks collision when it wants to bulldoze something. There must be something that is in collision with the bridge. If there are railways under the bridge, then bulldoze them before you bulldoze the overpass.

I tried obsalyutno everything, unfortunately saving the game without the overpass removed, and restoring the files did not help, the files were not found

3 days ago I built an overpass

@Patrit_08 When did you build the overpass? Your situation seemed to be very similar to a bug that occurred several months ago.

Help?! Pliz....

Hello, I have unexpected consequences, used the bridge as an overpass for cars. now the bridge doesn't break or change, what should I do? I would not like to delete the save and lose the map altogether, the cause of life and death)

@villavine10 This is designed as a road bridge, not a rail bridge. Using it as a rail bridge can cause unexpected consequences.

The pillars doesn't snap to tracks

@TimereLibertati Thanks for reminding me to change the speed limit. Previously I limit the speed to the speed of vanilla roads, which is 100km/h. Now the top speed of TFMR roads are 120km/h, so I made the change.

Why it is limited to 100 km/h? It looks lika a modern bridge.

That's what I get. Models from real interchanges. I just love this mod!!! Thank you very much for your work. Waiting for extensions
https://prnt.sc/u7248k
https://prnt.sc/u7262y

@CashonWheels Read the comment section of the other two TFUR mods. You'll find answer there.

UP主这个模组组合确实非常的好，对于立交建设很大帮助，至于桥墩方面个人感觉有点不协调，就是如果用了多车道（比如双向四车道），就算最大的桥墩也会显得太小，出发手动使用桥墩放置大型桥墩，但这样会累S人的（纯个人感觉），不喜勿喷。

Hello, great work. I want to implement it also as a rail bridge for the elevated stations .
In the first try it really fits great, also with the sections that become railingless. Nice.
So please...
1. May I realease this included in the next update with credits/link? :)
2. Can you turn the max speed higher. I'd like at least 200kmh but 300 would also be great.
Thanks in advance.

@rb58nl in this case, private vehicles won't use this 'bus only' road unless it is the only path to their destinations.

@rb58nl this can be done by upgrading the road to ‘bus only'.

我们婷婷真是太厉害了~

我们婷婷真是太厉害了~

我们婷婷真是太厉害了~

我们婷婷真是太厉害了~

Can you make a road that doesn't allow cars? This would specifically handy when creating an overhead tram line