Stormworks: Build and Rescue

Stormworks: Build and Rescue

CVT
13 kommenttia
mistzy 30.7.2022 klo 11.59 
you're a legend
goopfiddy 10.1.2022 klo 8.59 
hello can you make manual mode on this gearbox bcs some real cvt gearbox has manual mod
BokaBoka 5.12.2020 klo 22.00 
stormworks needs to add cvt transmissions..
BokaBoka 5.12.2020 klo 21.57 
i swapped clutch one and 2 on the logic it gives it more of the inf gear ratio that a cvt has irl it stalls at .35 now
BokaBoka 5.12.2020 klo 21.55 
i can see this has the same issue as mine at the certain point of .5
BokaBoka 5.12.2020 klo 21.51 
im trying something with 2 clutches and 2 gearboxes one gear box is for rpm and the other is for torque they ar eboth at 3-1 or whatever both gearboxes are setup at 0.5 as the center point and one clutch fully disengage while the other is fully engaged when for low torque and the same for high rpm but the engine stalls at the center point within -0.18-0.18
BokaBoka 5.12.2020 klo 21.49 
why is it that cvt transmissions in this game are so dang impossible
WALL-E  [tekijä] 17.8.2020 klo 17.56 
No idea if it still works. It requires a large amount of torque to run the transmission - maybe try using a larger motor.
BobKlobb 17.8.2020 klo 17.52 
Does this still work? Tried it with an electric motor to the prop and it was slower than no transmission. Didn't matter what the gear input was.
ProtowoSchweppes 30.3.2020 klo 6.17 
@Klyph u can make ur own im not saying it in a mean way
AXEL_X 26.2.2020 klo 15.03 
<3
aggressive cheeseburgers 1.2.2020 klo 10.14 
if so please tell me
aggressive cheeseburgers 1.2.2020 klo 10.14 
does this have an example car using this