UPDATE July 14 2025 still works fine. amazing mod

Does this need to be updated?

Update 25 November 2022: This mod still works perfectly fine. It's just nice when you disable cross walks, they are actually not visible either. So, a tip to get less traffic: Disable the crosswalks at busy junctions, and use Node Controller to make those cross walks further down the road, where it's less busy. Your traffic will like that a lot more.

@jrobertsimpson Link to the stable version is right in the first block of text...........

there is a stable page. if I want to conduct new experiment it will come here first.

Is this mod still experimental? Or is it more stable and ready to subscribe for a more average player?

@SergJack not the way this is done. Therefore exsis Blank Roads (BR3)

Could it be possible for this mod to also remove markings on segments (aka to make roads blank)?

@Embrao you can do with Intersection Marking Tool :)

Can't wait for the hand made junction texture support :D

this mod works only if no other mod fails.

So does this mod still work with DLS airports or do we have to wait for an update?

some other mod is failing preventing hide crossings mod to load.
I suspect its Extended managers mod that is incompatible with some other mod that is causing this mod to fail as a result.
we can provide more help on discord. or talk to mod owner.

The error message was appeared after subscribing (and unsubscribing to the old one). After a click, the game was running fine. Please check the output.txt. [drive.google.com]

at System.Reflection.MonoMethod.Invoke (System.Object obj, BindingFlags invokeAttr, System.Reflection.Binder binder, System.Object[] parameters, System.Globalization.CultureInfo culture) [0x00000] in <filename unknown>:0
--- End of inner exception stack trace ---
at System.Reflection.MonoMethod.Invoke (object,System.Reflection.BindingFlags,System.Reflection.Binder,object[],System.Globalization.CultureInfo) <0x0023b>
at System.Reflection.MethodBase.Invoke (object,object[]) <0x0002f>
at (wrapper dynamic-method) ColossalFramework.Plugins.PluginManager/PluginInfo.ColossalFramework.Plugins.PluginManager+PluginInfo.set_isEnabled_Patch0 (ColossalFramework.Plugins.PluginManager/PluginInfo,bool) <0x001f2>

--- End of inner exception stack trace ---

System.Exception: A Mod caused an error ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.NullReferenceException: Object reference not set to an instance of an object
at PrefabCollection`1[NetInfo].GetPrefab (UInt32 index) [0x00000] in <filename unknown>:0
at NetSegment.get_Info () [0x00000] in <filename unknown>:0
at HideCrosswalks.Utils.PrefabUtils.CachePrefabs () [0x00000] in <filename unknown>:0
at HideCrosswalks.Patches.LoadingWrapperPatch.Postfix () [0x00000] in <filename unknown>:0
at HideCrosswalks.HideCrosswalksMod.OnEnabled () [0x00000] in <filename unknown>:0
at (wrapper managed-to-native) System.Reflection.MonoMethod:InternalInvoke (object,object[],System.Exception+)

Is complicated.
Asset creators can create toll road without crosswalks using AR mod.

Is it possible to remove a toll road crosswalk?

I thought I was only subbed to one, that's what was weird about it.

only sub to one

I think the latest update to this version got pushed to the stable version, because I ended up with both subscribed. Bit weird.

in the mod settings you can exclude them

I believe i have two broken segments in my parking lot roads that ive ignored and have worked and been there for ever and when i installed this they were still present. However i haven't gotten any issues since that initial error and the mod has been working fine

do you have broken segment or missing asset?

I get thuis Error when i activate the mod
System.Exception: A Mod caused an error ---> System.Reflection.TargetInvocationException:Exception has been thrown by the target of an invocation. ---> System.NullReferenceException:Object reference not set to an instance of an objectat PrefabCollection`1[NetInfo].GetPrefab (UInt32 index) [0x00000] in <filename unknown>:0 at NetSegment.get_Info () [0x00000] in <filename unknown>:0 at HideCrosswalks.Utils.PrefabUtils.CachePrefabs () [0x00000] in <filename unknown>:0 at HideCrosswalks.Patches.LoadingWrapperPatch.Postfix () [0x00000] in <filename unknown>:0at HideCrosswalks.HideCrosswalksMod.OnEnabled () [0x00000] in <filename unknown>:0 at (wrapper managed-to-native) System.Reflection.MonoMethod:InternalInvoke (object,object[],System.Exception+ at System.Reflection.MonoMethod.Invoke (System.Object obj, BindingFlags invokeAttr, System.Reflection.Binder binder, System.Object[] parameters,

@Jokemon have youi subbed and activated all dependencies?

I get this message when I activate this mod:
A Mod caused an error [System.Exception]

Details:
System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.NullReferenceException: Object reference not set to an instance of an object
at PrefabCollection`1[NetInfo].GetPrefab (UInt32 index) [0x00000] in <filename unknown>:0
at NetSegment.get_Info () [0x00000] in <filename unknown>:0
at HideCrosswalks.Utils.PrefabUtils.CachePrefabs () [0x00000] in <filename unknown>:0
at HideCrosswalks.Patches.LoadingWrapperPatch.Postfix () [0x00000] in <filename unknown>:0
at HideCrosswalks.HideCrosswalksMod.OnEnabled () [0x00000] in <filename unknown>:0
at (wrapper managed-to-native) System.Reflection.MonoMethod:InternalInvoke (object,object[],System.Exception

@Frenklan Rusvelti - yes, there are several ways for this. Either you can use Network Skins - Hide Decorations - Junction Markings or you can use Node Controller Renewal and hide with this the Node Markings

Is there a way to hide the pedestrian crossings markings without actual removing the pedestrian crossing functionality? I want to add my own custom crossings with Intersection Marking Tool

@RubyRobbins Thanks!

My most favourite mod! Thank you so much! <3

@sLurMz ofc yes :)

does this work with Node Controller?

@Laurent - unsub Harmony, unsub the Mods that uses Harmony as dependencies, wait until the folders are deleted, subscribe again to Harmony and afterwards to the other mods.

@sebesams I second that. All these modders have made this game so much more enjoyable. I can't even think of playing without a few mods not working atm lol'

****** ERRRROOORRRRRR!!!!!!!!!! **************
**********************************************
HARMONY MOD DEPENDANCY IS NOT INSTALLED!

solution:
- exit to desktop.
- unsub harmony mod.
- make sure harmony mod is deleted from the content folder
- resub to harmony mod.
- run the game again.
**********************************************
**********************************************
[System.TypeLoadException]

Details:
System.TypeLoadException: Could not load type 'HarmonyLib.Harmony' from assembly 'HideCrosswalks'.
at KianCommons.HarmonyUtil.InstallHarmony (System.String harmonyID) [0x00000] in <filename unknown>:0

download Load order mod from my discord channel

Thank you for this mod. Looks like the latest Harmony update may have broken it. Get this error when loading save:

[System.TypeLoadException]

Details:
System.TypeLoadException: Could not load type 'HarmonyLib.Harmony' from assembly 'HideCrosswalks'.
at KianCommons.HarmonyUtil.InstallHarmony (System.String harmonyID) [0x00000] in <filename unknown>:0

thanks for the kind words

@kian.zarrin: Thank you! That glitch made me realize how much joy this mod brings to my cities! Excelent job on the speedy solution. Thumbs up!

thanks guys. fixed the issue with vanila+ roads

> I get an error in HideCrosswalks.log: "did not found options configuration file: Could not find file "G:\SteamLibrary\steamapps\common\Cities_Skylines\HideCrosswalks.Config.txt"."
just ignore it

Looks like i have the same issue that IC trab found. I use Delta 5-1's Vanilla+ roads extensively, and crosswalks show on most roads now. Since 2 days.

https://gyazo.com/cb02bf1090f5e54514de6cfc6bc16d90

One the latest updates seems to have broken compatibility with Delta 5-1's Vanilla± Roads. Crosswalks are being hidden on vanilla and network ext 2 roads but no Vanilla±. Was working fine a couple of days ago. Exception list is untouched. Here are screenshots from 3.0 stable and 3.0 experimental. stable screenie , experimental screenie ,

I get an error in HideCrosswalks.log: "did not found options configuration file: Could not find file "G:\SteamLibrary\steamapps\common\Cities_Skylines\HideCrosswalks.Config.txt"."

I changed my mind. roads with no elevations and tunnels will also be supported.
i need to make this backward compatible and people are already complaining.

new fixes have been made (see changelog)
roads without tunnels have been excluded mainly because I haven't seen any road without tunnel that is suitable for hide crossing. But if you know some please let me know and I put it back in.

if all goes well I will upload this to HTC stable

@kian.zarrin The road in question is Big Suburbs 2 Lane Road

There's no visual crosswalk in the asset but when you prevent pedestrians from using the crosswalk the gray road gradation from your mod shows through the grass. That's why I want to be able to add it to the exceptions list.

This is what is happening: Link

give me link to the road

@kian.zarrin When I open the Options window and select "Mod Settings" for RM Crosswalks 3.0 I see two choices, click on the mod generated "Exceptions List" and "Save." The road that I want the mod to ignore is not in that list and I do not see a feature for adding other roads to the list.

What I see 1
What I see 2