Your CargoContainer fabricator/printer is amazingly compact!
I tried to build something myself but I couldn't get it to work with welders on the side.
Now I've reverse engineered yours and I like it!

i just noticed something about this series
for a mining company they kinda lack the mining vehicles

Really like the SIM line of vehicles and stations for survival. Would you be able to publish the fabricator rotor head as it's own blueprint for use in survival, or do you mind if I publish it?

Do civilians use this base in the belt? Does the CEU condone such a thing? Does contract with HS?

hello I allowed myself to add your station in my mods because I found your station very beautiful, I indicate your name in the games on this station :)

https://gtm.steamproxy.vip/sharedfiles/filedetails/?id=2000434869

@Quickblood611 - Check the build out in creative, you can see the timer set up there. It'll be easier that way than trying to explain in text.

You can make a blueprint of the grid on the piston head in creative. You should be able to add a small grid rotor head to the large grid advanced rotor on the piston via the terminal screen, and then use a small grid projector to project the grid for welding.

Also whatever block should be set up in the first timer is blank

I see that the projector is not built due to not being able to do multiple grids but is there any guide on what to set up and how. I have seen an advanced rotor mentioned to get a small projector but what direction do you need and what name is the build expecting?

This base does look impressive, but I will not keeping it around as base. I however do think it may serve me better as a learning tool.

Good things:

- Seems to have everything present
- Love the fact that it has multiple docks for both ground as air vehicles.

Bad things:

- It's a maze
- The ramp can cause trouble for some ground vehicles as it is too steep (which actually counts for all ramps meaning all bases will have this issue I guess?

Small tips
- Building a flat surface floor for this base would be a good idea
- Try to figure this maze would be a plus.
- Traveling slowly to get on or off is a must do, don't ignore the signs

@Jakaria - No problem. Great mod btw.

@diex40 - Check ownership, make sure all blocks are assigned to you.

is it okay if I use this to showcase effects in my weather mod? Your blueprint will be linked in the mod's description, it's not used as part of the mod, only for the thumbnail.

@diex40 you have to build it from a connection off of the grid of the projector otherwise you dont have a start point if it helps set show buildable only once in position to see where you can start building from

['#
i

ya the fab on it wont work for me at all. i get the projection but its not buildable

Please build a mining set up to go with this! Awesome builds!

Ok so i tested it on multiple different saves and worlds and it worked on them just not on the first one were it broke. Welp, guess im just gonna use a diff world

why no guns?

ill try a new world file and see if it works

i can see the pod perfectly fine and im using the button next to the printer and the control seat up in the tower

@[TLOD] Bush Yowie - I've just tested the fabricator in game and it seems ok.
Can you see a projection of the pod?
Are you using the timers to start building or activating things manually in the menus?

Can somebody help me pls, i have an issue with the cargo pod printer. I have been spawning the base in creative all over the system but none of the 5-6 base's printers work properly, I even tried building a few of the blocks in the middle of the pod to kick start the welders because i thought it might be out of reach but when i tried to grind them away because it didn't do anything the welders kept fixing the merge block i was grinding so it clearly wasn't that. I also tried putting every single building material inside of the base's storage containers but that didn't fix it either.

Any help would be nice but if nothing can be done about it then RIP i guess. Posting then going to bed so ill check this thread tomorrow.

okok, I built it in survival, thank you and well done, you made a very good work :D

@=MFIC=matto_SeaLS - There is a projector built into the small grid connected to the piston head via an advanced rotor. If you built this in survival, that part will not have been projected during building.

ok, i tried, but there isn't another projector, there's just the maintenance one... Where's the other one?

@5URG3 True. My former comment wasn't meant serious anyway. :)

@BlankFX - In game scripts are not mods in the traditional sense as they don't modify the game, rather use an in game block in the manner it was intended. I get where you are coming from, but in my experience, this seems to be the community consensus.

@=MFIC=matto_SeaLS - The spaceport fabricator is not designed to build Eager cargo drones, only Standard Cargo Pods. It might work, but I've not tried it. From the error you are getting, I'd say you were trying to load the Eager BP into the Large Grid Projector "Maintenance Projector". Try loading it into the other projector, which I believe is called "Fabricator Projector" or something similar. It will be a different colour in the Terminal menu. Good luck!

Hi, I have a question: how is possible to let the welders build Eager Atmospheric Cargo Drones if the projector says "Incorrect blueprint size. Blueprint size must match that of the projector" ? Could you help me please?

Fun Fact: "No Mods" - On Screenshot we can clearly see how Automated LCDs 2 is used, but I assume thats not really a dependancy.

@CreyF1sh - Use the loading connector, the one opposite the entrance. Edit the Loading Conveyor Sorter whitelist to select what you want to load. Alternatively, set the sorter to use blacklist with no items listed.

how do i recall the resources i put into the station back to the shipping trucks?

Thx, fixed it myself already (bit more ugly, but it works, way to far with other modifications to go back now) :)

@[UGC] Target - That is a fault. Sorry about that. Thanks for letting me know. I have fixed the conveyor break and updated the BP, see notes.

To fix the break, remove a reactor from the right hand side of the Reactor Room and take a pipe upward, there is a conveyor nearby to join on to. You need to remove an armor block or two to get to it. Please see updated BP for details.

Just built it in survival, the conveyors for the welding guns and drone charging stations are not connected to the main grid, so the welders don't work... Am I missing something?

Danke

I just took another longer look at this and messed around with the builds you linked to go with it. I'd like to upgrade my comment to "This is fantastic work, can't wait to see whats next!"

No, but Epsilon is.

Thanks

Thats what I thought it was, wasjust asking!

Isn’t that a greek word/ letter (which one though?)

@Cougarbait - Cheers!

@CTH2004 - "sh"

@xxhanzo - Nice. I like it. Gives me a few more ideas.

@Nerfed - Yes, I was planning on it. Might take a while though.

Love the design. Will you make a more production based structure? With some larger refineries

I built a neat little atmospheric miner that hooks on top of a cargo pod so I can Switch out the cargo pod while it drains ice/ores into some refineries. I really enjoy this base!

Okay, semantics question

Does the ch in the name create the: K or the SH sound

Nice job on this

I love the military/heavy-industry feel.

@Echo Mande - Probably a smart move. Maybe a bit too disco. :D

@Quickshadow10m - Cheers man! More builds on the way soon.

@Stratus - Glad you like it! Good to see you back.

I absolutely love the container printer feature!

Epic dude! Im following U btw

Gorgeous but heavy on the lights. Personally I would remove most of the running corner lights around the pads.