Kauppasivu
Stormworks: Build and Rescue
Kaikki Keskustelut Kuvakaappaukset Taideteokset Suoratoistot Videot Workshop Uutiset Oppaat Arvostelut

Stormworks: Build and Rescue

Kauppasivu
Stormworks: Build and Rescue >  Workshop > Käyttäjän GERUNIMO Workshop > Galeazzi Submersible Decompression Chamber (SDC)
Galeazzi Submersible Decompression Chamber (SDC)
Kuvaus Keskustelut0 Kommentit16 Muutokset
16 kommenttia
< >
GERUNIMO  [tekijä] 9.8.2022 klo 11.44 
UPDATE 09 AUG 2022:
- Made some small cosmetic and operational changes

ENJOY!
GERUNIMO  [tekijä] 5.10.2021 klo 20.15 
UPDATE 24 Sept 2019:
- The Drain Pump is now effective of removing water from from the Chamber at any depth

ENJOY!
GERUNIMO  [tekijä] 18.9.2019 klo 14.16 
So I was going to pull up this link: https://www.youtube.com/watch?v=Ocf_fSMSkgU&t=448s to show you how the SDC was used by Cousteau. I heard Cousteau mention "we enter the WARM haven of the decompression chamber"....FINE! I'll think about adding a heater :steamhappy:
GERUNIMO  [tekijä] 18.9.2019 klo 14.09 
I like the idea about the seats and I suppose I could increase the tolerance for the decompression depth. As for the heaters, even in the arctic no amount of insulation or circulating fluid in a dry suit would protect you from the frigid waters forever. You might just have to manage your time on the bottom better, not trying to be mean, but making it too easy takes some of the challenge out of it. Also space is limited (as you know) inside the SDC, not unlike the original. Storage of scuba gear inside of the SDC would be difficult especially after adding seats...
x170doom 18.9.2019 klo 11.41 
also a bit more leeway for the depth decompression starts at would be nice (maybe from 15m and above?)
x170doom 18.9.2019 klo 11.40 
this could do with a heater of some sort for arctic diving (cant tell you how many times i've frozen to death in it). plus maybe some of the new seats to avoid some of the physics issues and maybe a way of removing your diving gear whilst inside the chamber (water pressure now does damage)
GERUNIMO  [tekijä] 18.6.2019 klo 23.04 
Should be about 100M (length of the cable). But it will stop descending 25M from the ocean floor.
Egon 17.6.2019 klo 6.55 
Max depth is 70m?
GERUNIMO  [tekijä] 8.4.2019 klo 8.45 
Oh, well go over and watch the tutorial videos for Calypso of which there are two.
Hope that helps
Tombstone 8.4.2019 klo 8.42 
I mean the boat I can’t start
GERUNIMO  [tekijä] 8.4.2019 klo 5.59 
pix egon, unfortunately the single Drain pump is not strong enough to pump water out below 10M. Its purpose is to well, drain the water at or near the surface. Because of space limitations I can't add more pumps. Sorry about that

HowlingWolf h5, I'm going to need alittle more information then that to help you. What steps did you follow? Did you leave the SDC sitting around with the connector on?
Tombstone 8.4.2019 klo 5.14 
I can’t Start it
Egon 8.4.2019 klo 2.01 
Pumps not works
GERUNIMO  [tekijä] 5.4.2019 klo 20.48 
Ok there is a description for yah so noone is going WTF anymore. :steamhappy: Sorry for thwe looong wait
GERUNIMO  [tekijä] 3.4.2019 klo 12.06 
Been busy, I'll get instructions up, hold your horses.
Tombstone 3.4.2019 klo 11.05 
Wtf