For it looks like it is working...

2 years ago I posted that 81 tiles was messing up my metro. After coming back to an old map, it is not, in fact, 81 tiles. It is indeed these metro platforms that are messing up my transit. It's a great idea, but this asset is broken. do not use.

I have this problem during building my metro system. It looks like the tracks are going to the ground. But the tunnel they enter to the station is shown only 1/3rd. I think that the tracks fixpoint on the station is higher than the tracks in the station. It happens only on one line. The 2nd line works well.

I think the modder do not longer support this mod, so we can not use it anymore.

I have had a strange issue with this. After creating a network of metro, the next time I log onto the game, the tunnels have risen to above ground level and it creates havoc on the rest of the infrastructure. Have tried to recreate the tunnels, but the problem keep coming back. Any thoughts are welcome.

I thought this mod was breaking my metro. it's the only addition I have to mass transit. I researched and think (I could be wrong) I found a problem. according to redit, 81 tiles will sink your metro by -12 every time you buy a new tile. Just have to unlock all at the beginning instead of 1 at a time. Or else rebuild your entire metro every time. Hope this helps

it still worked until yesterday.
But it broke this morning, all lines and stations had no connection any more.
What happened, can somebody help my mega city, which can not leave this mod.

Still working for me in June 2022.
Great asset to build a tight metro network.

This asset still works for me as of 4/18/22.

it doesn't work when I start my city the second time QAQ

Спасибо! Твой мод решил мою проблему с переходными станциями!)

I'm sorry to hear that it broke. Unfortunately, in the last 2 years the game got bloated to a point where it does not even start on my laptop, so I can't fix it :(

update please.....

Broken...

Bad news, the update (Sunset Harbor) broke this by changing how metro lines work.

the new metro trains are longer now, so they get stuck in these stations

bazilion months later and there was still room for this fantastic idea i dont know how this isnt in the base game

Great work, to bad Paradox f´ed up again and made this building useless

Same opinion than the parallel one. Amazing!

If you have problems selecting the other paltform for a line, try Advanced Stop Selection (ex MTSE) mod. Using this mod, pressing <Shift> automatically selects the other platform for adding or moving a stop, or creating a line.

Love the idea. Always open for space saving concepts.

If the nodes for attaching the metro lines could be pulled further appart (maybe offset the platforms one the entrance node) so that the platforms each attach closer to one of their ends, it might work better. Just an idea.

\/ It's a good mod. I'd recommend it if you're making your metro stations realistic

I have no idea, I've never tried the mod.

Does it work with Metro Overhaul Mod?

These worked really well at cleaning up my subway network. Highly recommended. There is a weird bug with how stops can be placed on a line, but that's not hard to work around. Definitely should have been in the base game.

I have a problem with pedestrians. They entrance to metro station for middle of street, empty sites... all places different the metro station entrance. I don't care make ultra realistic cities, but traspassing floor is much for me

Thank you for both stations!! Really needed:)

Hi, the station saved me from a horrible jam of trains. Now over 1,800 citizens per week are benefiting from your great work! Thank you!

I don't know why the devs don't include something like this in the base game. This is so usefull, thx

I have the same problem with most of these multi - platform stations, they work fine if the are the end of the line but when you continue the line because of a new area the line you drag to the new are will now be the end of the line but the multi platform station only excepts one stop??? I tried hitting shift or ctrl while clicking for a stop I've even made sure the other line is not visable. No luck. Help!

For all those having problems with adding stations ('cannot find path') etc, this guide by u/tw3nty0n3 will solve them. No mods needed.

Well. It works with me. Can you do a 3 and 4 platform cross? It will be great

Marker always jump and say: can not find path. I can not finish my line.

can this work with MOM？

在1.10版本的游戏里，需订阅 允许多轨站台mod 才能完好使用此模型；否则两条轨中的一条无法启用多于一个站点。

To fully support two lines in 1.10, consider using the Multi-Track Station Enabler mod as mentioned by others below. Without the mod, one of the tracks can't have more than one stop.

Затем снес лишнюю станцию на нижней ветке. Насколько я понял глюк возникает в момент очередности установки станций на узле. Нужно заставить игру сначала верно увидеть третью точку, только после этого четвертую. А это легче всего сделать когда ситуация как на скрине автора(перекресток с продолжающимися ветками).

Прекрасный мод, для любителей метростроения.Но как верно замечено, глючной. У меня верхняя платформа это кольцевая линия через весь город, а нижняя это хордовые ветки с центра на переферию. Косяк в том на верхней платформе(кольцо) не ставится маркер второй обратной остановки.Хордовая станция у меня была конечным пунктом. Решил необычно - продлил хордовую ветку(нижняя платформа) еще на одну станцию и удлиннил по ней маршрут, проставив заново на ней все точки. Далее также заново проставил на кольцевой линии и все заработало.

It works without mods, but for lines using the same station twice, Multi-Track Station Enabler seems to be requred

Hi Norrius. Thanks for the mod. Cant get it to work initially as my subway lines always loop back. When I try to add a second stop on same level with the same line, the round dot just jumps to the other level and gives me a "cannot find path"

Works great! I'm happy to have a multi-platform metro that doesn't require mods!

I am also having trouble putting stops on both sides of the same line. It keeps trying to move to the other line (upper or lower line).

Is work fine for my, i have no problem. I just wanted to say it because I see that some of us have problems.

Ok I think I have worked it out. You need to add lines going through both platforms then add a single stop to both the the upper and lower platforms. You can then add the second stop to the platforms.

After more testing, I am able to reproduce this. It seems that it works better if there are lines passing through all tracks when you are adding stops.

Yes it jumps to the upper station and I can't get it to go to the lower one.

Thank you for your comment Termite! This is very odd, because I've just tested this station on another PC with no mods and I had no problems with setting stops on all four tracks. Just to be clear, does the stop marker jump to the upper station when you're trying to add a stop on the lower station?

Nice idea but I still need mods to add stops on both platforms for the lower tunnel otherwise I get a 'cannot find path' error.