how do i apply custom livery on these

capacity?

We have these in my city. I call them alien busses. They're awesome, but the models built after 2018 have hard seats.

This is a nice change to the non-"bendy" vanilla bus. Takes up to 60 passengers, twice as many as the base game bus, so it's great for busy routes. Thanks!

There is no way to make a trailer for a bus unless it is in the agriculture, oil, or ore trailer. I've talked with other creators about this, this is why the XT60 cannot become a trolleybus. If you look at other articulated buses on the workshop, you will also find the trailer is in one of those three categories.

@ninjanoobslayer - it's not the capacity, the trailer will move into the wrong category, this is the issue and confuses users. I am reading the m_service values and sorting by it in the AVO mod, but when category is wrong, it obviously moves to the wrong place. So no change possible, if I understand it ?

It's the only way to have trailers on buses. You should just set the capacity on the main bus, not the trailer.

@ninjanoobslayer, the trailer of the Bus spawns as a Oil-Processing/Industrial/IndustrialOil instead of PublicTransport/PublicTransportBus. Can you please check it ? The trailer of the Bus will be displayed wrong in AVO due to that.

See screenshot under: https://i.imgur.com/QoPLJHw.png

its amazing

Fixed! :D

it still seems to be broken, i would have to respawn my busses every game, pls fix

@Aminushki hold on, I'm uploading a REAL fix right now. I'm hoping it works.

I'll probably have to do it for my other articulated buses.

yeah respawning fixes it, thanks

@Aminushki, All the buses need to be respawned. I can fix it shortly and see how it looks.

fairly sure the last update (today) broke the asset. The rear part of the bus doesnt load and shows up as missing in the loading screen mod.

Great - thank you both!

Yes, or you can do it like this: https://scontent-lax3-1.xx.fbcdn.net/v/t35.0-12/28034494_10213576301674772_113518293_o.png?oh=43caf54908bdb93e8760bc84bd00193c&oe=5A85A6D6 in which the bus stops on a lane that was created specifically for the stop segment. In this case, traffic would flow freely on the other lanes and the bus would have a lane to itself

Have at least 8 squares of zone-able space between intersections. Or multiples of 8-10.

Well, you can increase the curvature with Move It, but it may not always be possible. Alternatively, you can convert it into a wider road and set the outermost lanes to bus only so then the bus will pull into that lane for the stop.

I can send you a picture shortly.

Thanks for the reply! How do you make the stop a longer segment? Like manually manipulate it with Move it or something?

Here's a screenshot of a longer segment where the bus does not block traffic:

As you can see, it's 10 units long, which allows the bus to coast into the stop. The traffic can drive by it smoothly.

https://scontent-lax3-1.xx.fbcdn.net/v/t35.0-12/28124673_10213576162791300_1006493146_o.png?oh=a57901094df5824809fcb03fb10448f9&oe=5A861C13

Does that help?

You need to make sure the stop is at least 10 units long. This means the stop needs to be a longer segment of the road.

I don't have problems with that in most cases. You can also upgrade the segment of the road to a bus lane to resolve that problem.

Love this bus! Great detailing and a lot of work was put into it - thanks! One observation/question. On most stops the last 1/3 of the bus will remain punched out into the travel lanes, blocking traffic. Is there a way to fix this? (Either with the bus itself or through some other means of designing/modifying/placement of the stop?). Would love to get some advice on this. Thanks in advance!!!

Ah well, just thought I would ask.

Sorry, all my future full size transit vehicles are going to be in this coherent striped livery. I won't be doing full line colors except for shuttles

I would love a a version where the entire bus was the line colour like you did with https://gtm.steamproxy.vip/sharedfiles/filedetails/?id=1115752945
Since I spend most of the game looking down from high above it makes identifying easier…

Great bus mod

@TheInvertedFan no problems, don't worry about it. All my vehicles that are based off of other people's work are done with permission

oops... Now I feel like a idiot... (insert Seinfeld theme)

@The Inverted Fan if you even bothered to read the first line of my actual description, you would have understood there is no need to post that comment. "Originally devised by outstandinggamer, the NewFlyer XD60..." and did you even look at the main image. It says ORIGINAL BY OUTSTANDING GAMER in big capital letters.

@TheInvertedFan, outstandinggamer allowed me to use it. He even said to release it in a private chat.

READ my sources, READ what I did, there is a reason I explain what I do. I tell you in the description that I DERIVED IT FROM OUTSTANDING GAMERS VERSION. We chatted about it, we're even collaborating on other models too.

It is a resized, illumination fixed, and trailer improved version. it's better in almost every way. If you don't believe so, subscribe to both.

Are you sure you aren't stealing? http://gtm.steamproxy.vip/sharedfiles/filedetails/?id=624713919

@Lusca, bi articulated would be int he way future. I'm working on a road maintenance set and a aerial tower (fire ladder truck)

You've made me change all the busses in my city, haha, I'm not that into american busses but this one kills it! Amazing work! By the way do you plan on doing a bi-articulated bus someday? Just a suggestion, I bet it'll look gorgeous. Thanks for your amazing work! ;)

I'm a bus driver in Seattle and I drive this exact type of bus. Bro, you knocked this outta the park! But that seems to be the norm since most of the vehicle mods I've got are from you! Can't wait to see whats next!!