Space Engineers

Space Engineers

评价数不足
(STS) External Tank V 1.0
   
奖励
收藏
已收藏
取消收藏
Type: Blueprint
文件大小
发表于
302.352 KB
2015 年 4 月 14 日 上午 8:46
1 项改动说明 ( 查看 )

订阅以下载
(STS) External Tank V 1.0

描述
This ship is included in the (STS) Cape Canaveral V 1.0

To make this fully useable, you will need the Orbiter and the two SRBs (Left and Right)

The External Tank provides the fuel for the Shuttle Main Engines during the launch. In our case it also controls the simultaneous separation of the SRBs with its internal timers. At the moment of SRB separation an automatic gyro will counteract the thrust produced by the orbiter. After its separation it will slow itself down to zero speed. The cockpit and remote control of the ET faces away from the shuttle. What you see in the picture is the back side of the ET!

Mods: - none -


Group 1
1 ……..………. Maneuver Thrusters ………..…….... ON/OFF
2…………..….. Camera Top………………….………. VIEW
3………………. Camera Bottom…………………....… VIEW
4………………. Camera Left………………………….. VIEW
5……………..... Camera Center…………………....… VIEW
6………………. Camera Right……………………...… VIEW
7………………. Timer ET1………………………….… START
9…………..….. EMERGENCY SHUTDOWN……..… START TIMERBLOCK

WARNING: The EMERGENCY SHUTDOWN activates a Timer that will immediately switch off all
other Timer Blocks and Gyros and will switch on the Maneuver Thrusters, so the ET will stop moving.