Glider Cockpit

4 Propulsion (im using fans)

4 Fuselage Parts

• 1 segment neck
  
• 3 segment body
  
• 1.5 segment tail start, shrink end to minimum and raise till flat/ 3 clicks
  
• 0.8 segment tail end, stretch wide 2 clicks at end

4 Rotation joints

20 Solar panels (If Electric)

2 tail wings/ your best

(should be like this) ps. not putting 20 solar in for demo

Assembling isn't hard just tedious
first assemble as close to this image as possible




Next.
fill the plane with 20 solar panels make sure to rotate and move so no solar panels are visible. then change rotation joints to your desired button (i recommend S for rotate left and W for rotate right)



Finally.
Fine tune the positions on the joints so they are an even space away from the centre of gravity
end result should be

This game really hates VTOLs at the moment so be warned
(I recommend disabling auto balance in main menu options)

Takeoff
Don't fly right away instead angle your propulsion ahead slightly. You need some forward propulsion to keep the camera under control
next for a light take off set power to about 10%-15% from here try to get use to VTOL controls
For a max take off again rotate joints but instead max power.

Flying
Flying for the most part is the same but slightly more wobbly and to turn you need to roll right or left and flatten the propulsion

Landing
As for landing when you approach the landing strip rotate your propulsion all the way back to slow down and to land when slow enough turn down power to again about 10%-15% and slowly decrease

This is my first guide so there is probably alot i forgot to mention or add

p.s i want to add some monstrosity i made as a VTOL

I PRESENT THE ONE PROP VTOL