In this section of the guide, you will learn how to start the game in OHV - from waking up to taking your first job.

[WARNING: THE GUIDE MAY CONTAIN POTENTIAL SPOILERS]

After waking up, we can hear a dialogue with our mother, who informs us that she is going to her aunt's and suggests that we find a job.

--------------------
1.1 - Receiving a CV and a cover letter

After finishing the conversation with your mother, you will find a CV with a cover letter on the desk next to the couch. You should pick it up and put it in your inventory.
--------------------

After taking the CV, it is worth spending a moment to explore the house and the plot. There are many interesting items there, such as pickled cucumbers or a kettle with water. I also encourage you to go out into the yard and interact with various tools, such as SAM, a grinder, a brush or metal profiles. The construction mechanics in the game are very satisfying and give you a lot of fun.

--------------------
1.3 - Traveling to the workplace in the Nysa

We get into the Nysa and after leaving the plot, turn right. It is worth remembering that the Nysa can be personalized - for example, painted, sanded or washed. I encourage you to have fun personalizing the Nysa!

--------------------

1.4 - Getting to the workplace:

https://youtu.be/p9zI5UVEqns

--------------------
1.5 - Getting a job at the construction yard

You should go to the door and talk to the guy, give him your CV and do the job that was given to you.

2. Buying an OHV car (Polonez)
In this section you will learn how to buy an OHV car (Polonez)

--------------------
2.1 - Arriving at the car scrapyard

In the city (Lubcza) we go to the car scrapyard, the same place where we had to deliver the scrap from the construction yard.

--------------------
2.2 - Talking about the purchase

You should talk to the guy behind the door of the building about the titular "rubble"

--------------------
2.3 - Choosing a method to get money

After the conversation, we have two ways to get money to buy a vehicle:

- Option 1: Complete orders with the delivery van (SMAR) until we earn 500 PLN
- Option 2: Return home and call your mother using the phone in the kitchen, then your mother will give you money for the car. THIS MUST BE DONE AFTER ASKING THE GUY AT THE JUNKYARD ABOUT THE VEHICLE

Solution to option 1:

Working in circles until we earn 500 PLN with the delivery van (SMAR) given to us

Solution to option 2:

Return home and call your mother, according to the dialogue from your mother, the money can be collected through the post office in the city, which is located on the city market.

2.4 - Final purchase of an OHV

You have to go to the car scrapyard with SMAR (a delivery van, a truck that we received after getting a job), drive up to the OHV, pay for it at the guy at the car scrapyard and the car is ours! All you have to do is drive it to the garage.

3. Building a SAM vehicle
In this section you will learn how to build and construct a SAM vehicle.

--------------------
3.1 - Location of the SAM vehicle

The SAM vehicle in a state requiring assembly is located in front of the garage.
--------------------

3.2 - Resetting the SAM vehicle and changing the type of pipes

This can be done using the "DIY" catalog located in the garage
--------------------

3.3 - Cutting profiles/pipes for the SAM vehicle

To cut a profile or pipe:

1. Place the profile on the vice - take the profile in your hand and click on the vice located in the garage
2. Use the grinder (so-called boszke) - located on the table in the garage. Put a disc on it, then turn it on and cut a piece of the profile mounted on the vice

Additionally, you can use the grinder to modify already welded profiles or pipes on the SAM vehicle

--------------------
3.4 - Welding profiles and pipes for the SAM vehicle

Preparing the profile:

While holding the cut profile, turn on the "Welding preview" mode using the X key.
Set the profile on the frame of the SAM vehicle, then confirm the position by clicking the left mouse button.

Welding the profile:

Take the welder located in the garage. If the welder does not have an electrode, attach it in the same way as a disc on a grinder.
Point the mouse at the mounted profile. The welder will automatically position itself on the element to be welded. If this does not happen, it means that the profile was mounted incorrectly or is bugged. In this case, you should mount it again.

When the welder is correctly set, hold down the left mouse button and start welding.

4. Basics of sheet metal in an OHV car (Polonez)
In this section, you will learn how to perform sheet metal and basic repairs in an OHV car (Polonez)

--------------------
4.1 - Washing the vehicle

The first step in working on a car is to wash it thoroughly. You can do this using a bucket with a sponge, which is located in the garage.

By washing we will get rid of white spots on the polonaise (bird's diapers)

To wash your vehicle:

Take a bucket with a sponge.

Enable wash mode using the X key.
Rub the sponge over the areas that need cleaning until the area is clean.

--------------------
4.2 - Rust Removal

Rust removal is the next step when working on an OHV.

We remove rust using a grinder (boszka) with a brush attached.

To remove rust:

Take the brush in your hand
Turn on the brush using the X key
Scrape the paint off the rusted area to get this effect:

--------------------

4.3 - Painting with paint

Painting is the next step in the process of making the bodywork in your car.

For this, we need a can of paint, which can be found in the garage or purchased at a car shop.

We paint using a brush that can be found in the garage or purchased at an automotive store.

To paint a part:

Open the paint can
Take the brush in your hand and dip it in the paint can
While holding the brush in your hand, turn on the painting mode using the X key
Paint the part you want to paint to get this effect:

--------------------

4.4 - Polishing

Polishing is the last step in the process of making the bodywork in your car

We will need a polishing paste, which can be purchased at a car shop in the city

To polish a part:

Take the polishing paste in your hand
While holding the polishing paste in your hand, turn on the polishing mode using the X key
Polish the part using the sponge in the polishing mode for an effect depending on the quality of the paste you buy: (basic, matte, premium)

Thank you for reading my guide and I encourage you to write suggestions and corrections in the comments! :)