Please note that all suggested tips and recommendations are presented for informational purposes only. Any action taken in accordance with this manual is at your own discretion and risk. The author is not responsible for possible consequences arising from the use of the information provided. The text may contain obscene language, so it is recommended that persons over 18 years of age read it.

CS2 offers a new type of anti-aliasing.
Instead of FXAA, Valve introduced CMAA2 in the game. Let's compare them simply and clearly. FXAA is a simpler anti-aliasing mode that simply blurs the image on your screen. CMAA2 is the same fast mode, but it, in turn, strives to preserve the clarity and details of the picture. Essentially, this means that CMAA2 can be enabled with minimal performance loss without affecting FPS, and produce an image with less pixel laddering and other image artifacts without anti-aliasing.


◊ Shadow quality ◊
◊ Surrounding objects ◊
◊ Texture quality ◊

Setting the Shadow Quality setting to its minimum will allow you to get 8-9% more FPS compared to the same setting set to maximum. Enabling ambient object occlusion reduces the overall FPS in CS2 by approximately 6%, so it can be disabled. Finally, a higher than average Texture Quality setting can result in approximately a 5% FPS loss. Do the math: the combined effect of these three settings can reduce frames per second by 15-20%.

◊ Nvidia Reflex Low Latency: Disabled
◊ Player Contrast Enhancement: Enabled. Does not affect performance, help you play better
◊ Particle Effects: Low
◊ Texture quality: Average
◊ High Dynamic Range: Quality
◊ Monitor resolution: default. Reduce to 1280x960 if necessary
◊ Multisampling mode: CMAA2. Good computer? Enable MSAAx4
◊ Shadow Quality: Low
◊ Shaders: Low
◊ Ambient Occlusion: Low
◊ FidelityFX: Quality
◊ +fps_max 0: This command disables the frame rate limit, allowing you to significantly increase the number of frames per second
◊ +cl_updaterate: This setting adjusts the number of packets sent from the player to the server, which can help improve performance
◊ +engine_low_latency_sleep_after_client_tick: This setting stabilizes the frame rate and eliminates stuttering. To activate, add the “true” parameter. You can also optionally set the +fps_max 300 command to control frames per second
◊ +cl_forcepreload: This command forces the map to be preloaded. It may take a little longer to load, but this reduces the possibility of freezing. Set to "1"
◊ cl_allow_animated_avatars: This command controls animated player avatars. It is recommended to use the "false" parameter to improve performance
◊ -nojoy: This command completely disables controller support, freeing up RAM and reducing system load. Set to "1" to activate
◊ cl_showfps 1 – enable FPS counter
◊ cl_disable_ragdolls 1 is a cs go console command that will help with frame rate during training. Often, when there are 3-4 smokes, it becomes noticeable that the FPS sags. This command will remove physics from cs go ragdoll. True, it only works with sv_cheats 1
◊ dsp_slow_cpu 1 - similar to the previous command, it will help you increase performance at the expense of a slight decrease in sound quality. +50 fps guaranteed
◊ r_drawparticles 0 is another command to increase the frame rate in cs go. Removes almost all animation - shots, splashes of water, etc.
◊ func_break_max_pieces 0 - remove any debris, such as barrels, fragments, chips from boxes, etc.

Many parameters are taken from CS:GO. It's possible that Valve may disable support for some of them over time.
Attention, many parameters may not work.
◊ –d3d9ex - allows you to quickly minimize and expand the game. Reduces CPU load by approximately 40%.
◊ –high—runs CS 2 with high priority.
◊ –freq X — sets the screen refresh rate. Instead of “X”, specify the parameter corresponding to the Hertz of your monitor
◊ -refresh X - changes the screen refresh rate. Replace "X" with the desired parameter.
◊ +ex_interpratio 1 - network parameter.
◊ –threads X — instead of “X”, specify the number of cores that the processor needs to use.
◊ cl_interp 0 - smoothes the image
◊ +cl_interp_ratio 1 - speeds up the connection to the server.
◊ +mat_queue_mode 2 - enables multi-core game processing.
◊ -nojoy - disables joystick support

One of the most effective methods that will help increase speed on weak computers is setting up an Nvidia video card for CS 2. This way you can correctly configure the graphics driver, which will significantly increase FPS and minimize the risk of lags and freezes.

Below we've collected the best Nvidia settings for CS2 and detailed which settings you should pay special attention to in order to change them correctly.

The Nvidia control panel settings for CS2 make it possible to set optimal parameters for the graphics driver so that the video card renders the image as efficiently as possible. It is important to correctly adjust the level of load on the system in order to optimize the entire gaming process as much as possible. This way you will focus on the essentials and discard the unnecessary. Moreover, experienced gamers understand that default settings are a road to nowhere. You need to be able to adjust your hardware to suit you so that your PC produces the maximum without being buggy.
We recommend how to configure an Nvidia video card for KS 2 to achieve improved optimization:
Right-click anywhere on the desktop. In the list that appears, click on the option called “Nvidia Control Panel”.

For Windows 11 users, the path to the program is slightly different. After right-clicking, select “Show advanced options”. The Nvidia Control Panel will be there.
If such a program is not on your list, then look for it through the Windows Control Panel.
A new window will open in front of you. Find the “3D Settings” section in the menu on the left and click on it.
Next, you should select the first sub-item – “Adjust image settings with viewing”.
Now you should set “Custom settings with emphasis on”, and then use the slider to change “Quality” to “Performance”. To do this, move it to the left.
Save your changes.
This is the next sub-item in the 3D Settings category. The important thing here is to set the minimum settings to relieve the load on your GPU. This way you will get increased FPS, which is very valuable. The right Nvidia software settings for CS2 will help with this.

In order to set the parameters with optimal values, you should follow the instructions described above, only at point 4 you should select “Manage 3D parameters”. And then you are required to:
⛏️In the new window you need to go to the “Program Settings” tab
⛏️In the drop-down list with applications, select the cs2.exe file as the program for the current changes, otherwise all further manipulations will apply to the entire system and not to a specific program
⛏️If cs2.exe is not in the list, you will have to add it yourself. To do this, click on the “Add” button on the right. If the file is not listed in the window that opens, click “Browse” below and look for the exe file in the system. It lies along the path: Steam\steamapps\common\Counter-Strike Global Offensive\game\bin\win64
⛏️Now all that remains is to set the recommended parameters there. Keep in mind that the full Nvidia 3d settings for CS2 contains a long list of all sorts of options, many of which are designed to make the picture look better and have no practical use. Therefore, professional esports players recommend completely disabling the following functions:
◕anisotropic filtering
◕vertical sync pulse
◕background lighting shading
◕shader caching
◕streaming optimization
◕smoothing – gamma correction
◕anti-aliasing – transparency
◕anti-aliasing – FXAA;
triple buffering
◕anisotropic texture filtering
◕Trilinear texture filtering
You can safely disable these features and you won’t lose anything. For example, stream optimization of CS 2 generally affects performance in different ways. For some, it helps to distribute the load across several threads, while for others, due to switching between them, FPS drops more. But this option, like others on the list, was created primarily to improve picture quality, so you can turn it off with a clear conscience.

But it is better to leave the following pool active so that the Nvidia setup for CS 2 is successful. We recommend setting them exact values:
◕pre-trained personnel – 1;
◕power management mode – maximum mode is preferred
◕smoothing-parameters and smoothing-mode – set application control
◕texture quality filtering – high performance
◕texture filtering (negative) – use the global parameter (Snapping)
As you can see, managing 3d parameters in CS2 is not difficult. Of course, there are many options, but you can figure out each one by spending no more than an hour of your time.

Indicators to a minimum where it is not critical in order to achieve increased FPS:
◊ detail of effects and particles – low
◊ shader and texture detail - high
◊ general quality of shadows – high
◊ anti-aliasing – FXAA
◊ vertical sync - disabled
◊ motion blur – disabled
◊ multi-core processing – enabled
◊ anti-aliasing mode – 8x MSAA
◊ texture filtering – Bilinear

In the settings, switch rendering to “DirectX 12” and restart the shooter.
Now go back to the settings, where in the list of parameters you need to find “Ray Tracing” to check the “Enable” answer.
Save your changes and restart the game again.

Immediately right-click anywhere on the desktop to select the NVIDIA Control Panel.
Now you should go to “Settings” and “Create your own resolution”.
Check the box next to “Enable modes not offered by the display.”
We indicate the pixel ratio and change the “Auto” item to GTF.
Test the option in the custom permission list.

In the Nvidia left menu, in the “Video” category, you need to open the “Adjust color settings for video” section. There on the “Color” tab there are 4 sliders, the first of which allows you to set the brightness yourself.

Right-click on any area of ​​the desktop and select “Nvidia Control Panel” from the list.
In the left menu you will see the “Display” section, and below it a list of items. You need to go to “Adjust desktop size and position.”
Now select “Full Screen” scaling and then “Run scaling on GPU”.

You can increase FPS in CS 2 the same way you did in Counter-Strike: Global Offensive. All these tips and tricks still work. To improve the game by a few frames per second, you can always:
Reduce graphics settings to minimum;
Reduce game resolution;
Close all side applications;
Use some console commands.
If this doesn't help and you still can't play comfortably, or you want even more FPS, your only option is to upgrade your hardware.
Your journey to mastery of Counter-Strike 2 promises to be exciting and memorable, and optimizing your game performance is an important component of your success. In this article, we discussed key graphics settings, strategies, and tips that will help you maximize your FPS in CS2, improving your visual experience and responsiveness to in-game events.
Remember that peak performance and mastery of the game is the result of constant practice and improvement. Experiment with the settings, apply the tips and most importantly, enjoy the game.
You can use old tips for increasing FPS from CS:GO
Yes, many of the tips for increasing FPS used in Counter-Strike: Global Offensive (CS:GO) remain relevant in CS2. For example, lowering graphics settings, screen resolution, and closing unnecessary applications can always help improve game performance.
What graphics settings in CS2 have the greatest impact on game performance?
The graphics settings that have the greatest impact on performance in CS2 are: Shadow Quality, Texture Quality, Ambient Occlusion. Lowering these settings will increase frames per second and improve game performance.