materials needed: 2 lights, tools, a saw (it doesnt have to be the saw im using), a resistor, an accumulator, boat motors, 2 buttons, wood, plastic barrels, glass (optional), and decorations (optinal)

first, line your barrels up and connect them with wooden binding.

turn on the rotor, pointer, battery, and resistor on your saw.



next, saw the wood like in the image above.

put the wood onto the barrels and connect them with wooden binding.

put 2 wooden pillars on top of the floor like a ceiling and you guessed it put wooden binding as shown on the image on top.
next, put a small wooden pillar at the edge of the boat floor and connect it with wooden binding.

check if the boat floats in water, if not add more plastic barrels.

now lets move on to the electronic part of the build.
add 3 (or more) to the back of of the plastic barrels.

now add a resistor, a button, and an accumulator.
connect copper wiring to the accumulator to the resistor.
next, put a button and connect it with a green propagation wire to the boat motors.
and then add 2 lights and connect them to a button using a green propagation wire.

now, add some decorations

lastly, add 2 glass panes on the front touching the ceiling and the bottom wooden pillar.


now you have a boat, go crazy i guess ¯\_(ツ)_/¯
(this is the end of the guide)