Abonnera för att ladda ner
Hot Roads: 2 lanes road basic set

A set of road components to make your own road network!
This set can make a road with two lanes for vehicles, and brick pedestrian path on each edge.
Each lane is around 4.8 m wide, and brick path is around 3.8 m wide.

Including:
4 m straight piece
2 m straight piece /w stop line * 3
8 m crosswalk piece * 2
30 degree soft turn piece * 2
30 degree sharp turn piece * 2
45 degree sharp turn piece * 2
Square road joint piece /w edges and corner pieces
Triangle road joint piece /w edges and corner pieces
3 traffic lights for vehicle
2 traffic lights for pedestrian

How to use:
1. decide what road line you want on the center of the road. Delete other lines. There are signs appointed to each road line on the center.
2. Merge the line with the road piece. Delete the sign appointed to the line.
3. Copy and align the pieces as you please.
4. For corner pieces, delete parts you don't need and connect the road pieces.

Note:
1. Brick "path" is a bit raised from the ground. May need additional terrain edit.
2. Curb pieces are meant for the flat surface, and would not work perfectly if you are making slopes.