Obchod
Stormworks: Build and Rescue
Vše Diskuze Snímky obrazovky Obrázky Přenosy Videa Workshop Novinky Návody Recenze

Stormworks: Build and Rescue

Obchod
Stormworks: Build and Rescue >  Workshop > Workshop uživatele Uran_Wind
80 hodnocení
ZE Wheels Steering
Popis Diskuze0 Komentáře26 Poznámky ke změnám
2
   
Ocenit
Přidat do oblíbených
Oblíbeno
Odebrat z oblíbených
Vehicles: Land
Microcontrollers: Microcontroller
Značky: v1.6.7
Velikost souboru
Přidáno
Aktualizováno
52.635 KB
15. lis. 2022 v 8.56
20. lis. 2022 v 20.13
Poznámky ke změnám (5) – zobrazit
Vytvořil
Uran_Wind
Offline
Prohlédněte si všechny kolekce (196), z nichž některé mohou být skryté
7,944 unikátních návštěvníků
4,831 odběratelů
102 přidání do oblíbených

Klikněte na „Odebírat“ pro stažení položky
ZE Wheels Steering

Popis
A controller for the wheel steering with dynamic reduction, optional angular stabilisation, and optional Ackermann steering.
  • Steering non-linearity is a modifier for the steering axis. The larger the value of the slider, the slower the steering value increases and the faster it decreases compared to the unmodified axis. Combine it with the adjustment of seat axis sensitivity to get the most comfortable steering curve.
  • Dynamic reduction changes the steering axis multiplier in range between the min and max steering sliders, depending on current speed. Reduction starts at the speed threshold for max steering and becomes full at the speed threshold for min steering in m/s. If you don't need the reduction, set the min and max steering sliders to be equal or just don't connect the linear speed node.
  • If you don't need the angular stablilisaiton, set the stabilisation sensitivity slider to 0 or just don't connect the nodes for angular speed and reverse.
  • For the Ackermann steering you should set the correct wheelbase length and track width of your vehicle in number of blocks. If you need multi-axle steering, duplicate the function gates with formulas for Ackermann steering with the same node inputs, and specify the corresponding wheelbase length for every extra axle.
  • Move the vehicle's center of mass forward for better cornering control.
Demo example.
Počet komentářů: 26
< >
systemerror414 13. zář. v 12.11 
May God bless you from now until the end of time.
I was going crazy because of the steering but now i finally have a car that doesn't spin out of control when i drive slightly faster.
Thank you.
CatWithABat 30. led. v 9.43 
Understood
Uran_Wind  [autor] 24. led. v 2.43 
No, it is not inverted. Correct steering direction is set for the wheels that both have the negative toe for positive steering value number, as it is the most intuitive way to install the wheels with suspension in symmetry mode. You can invert the steering axis input value, or if you are using the wheels without suspension, you can just rotate them 180 degrees.
CatWithABat 23. led. v 19.25 
It appears that the steering is inverted, how do I change it?
Agent Adam 3. srp. 2024 v 12.25 
thank you so much bro
Uran_Wind  [autor] 22. led. 2024 v 10.29 
Yes.
Alexamzer 22. led. 2024 v 6.27 
Is it ok if i use this in my car i will upload to workshop? :)
Kindmanathome 11. lis. 2023 v 12.36 
ok
Blixa 10. lis. 2023 v 18.50 
LET BRO COOK!!??
Uran_Wind  [autor] 24. říj. 2023 v 12.57 
Dont matter, can be any.