Kauppasivu
Space Engineers
Kaikki Keskustelut Kuvakaappaukset Taideteokset Suoratoistot Videot Workshop Uutiset Oppaat Arvostelut

Space Engineers

Kauppasivu
Space Engineers >  Workshop > Käyttäjän Usstan Workshop
Ei tarpeeksi arvosteluja
[TSI] Oil Refinery
Kuvaus Keskustelut0 Kommentit4 Muutokset
   
Palkinto
Lisää suosikkeihin
Lisätty suosikkeihin
Poista suosikeista
Type: Blueprint
Tunnisteet: large_grid, base, safe
Tiedostokoko
Julkaistu
667.888 KB
13.2.2022 klo 11.33
1 muutos ( näytä )
Vaadittu lisämateriaali
Tämä luomus vaatii seuraavat lisäsällöt
Space Engineers - Decorative Pack #2
Vaaditut luomukset
Tämä luomus vaatii kaikki seuraavat luomukset
Tekijä
Usstan
Kirjautunut ulos
Näytä kaikki 3 kokoelmaa, tekijöinä Usstan ja muut henkilöt
172 Uniikkeja kävijöitä
38 Nykyiset tilaajat
1 Nykyiset suosikit
Tarvitset lisäosan käyttääksesi tätä esinettä.

Tilaa ladataksesi
[TSI] Oil Refinery

1 kokoelmassa, tekijä Usstan
TSI Base Modules
23 luomusta
Kuvaus
Throll Salvaging Inc [TSI] is proud to present it's modular base concept. All modules have 1 or more external connections where you can use pipes or conveyors to link them to other modules. It is recommended to use a projector to align them to other sections on your base. Most modules contains 1 or more Acid Batteries, these can of course at later stages be replaced with Lithium Batteries. (Or if you don't use Industrial Overhaul, weld up a normal battery)

This module contains:
  • Bitumen Extractor
  • Oil Cracker
  • Synthetics Factory
  • Acid Battery

The TSI modules was inspired by the mod: Abandoned Settlements
4 kommenttia
< >
Usstan  [tekijä] 3.4.2022 klo 1.19 
I have more in the pipeline, but after some time with too much SE, I needed a little break. And yeah, a DNSK building is one thing that will come.

I might also release some of my full IO + DNSK bases, using the TSI buildings and others, but not with Isy's. After IO I've more switched over to NDS Inventory Manager, as I feel I gives me more control
Connolly 1.4.2022 klo 15.12 
Do you plan on making any more IO blueprints? I have absolutely loved the ones you've released so far, Theres a BP for a survival hub that has DNSK on it, was curious if you could make something like that, It was a fully functioning base with interior with everything connected ready to roll with isy's and auto lcds and such. Just a suggestion. Keep up the good work!
Usstan  [tekijä] 14.3.2022 klo 5.12 
Good catch @Connolly, I'm so used to adding [el][Pipes & Tubes] to my worlds that I forgot to add it to the required list here. You'll find the link to the right now. And thanks for the feedback :)
Connolly 16.2.2022 klo 20.15 
Which mod is used for the medium length conveyor above the synthetics factory, says I do not have it and removes that conveyor, Thanks in advance!! Absolutely love the buildings man keep up the good work