Trang cửa hàng
Space Engineers
Tất cả Thảo luận Ảnh chụp Tranh ảnh Phát sóng Video Workshop Tin tức Hướng dẫn Đánh giá

Space Engineers

Trang cửa hàng
Space Engineers >  Workshop > Workshop của Foltast
230 lượt đánh giá
OPC Rokiclaw - Medium Mining Ship
Mô tả Thảo luận0 Bình luận54 Ghi chú thay đổi
2
2
   
Giải thưởng
Yêu thích
Đã yêu thích
Bỏ thích
Type: Blueprint
Nhãn: ship, small_grid, safe
Kích cỡ file
Đã đăng
Đã cập nhật
10.698 MB
15 Thg12, 2020 @ 12:47pm
21 Thg03, 2022 @ 10:58am
5 ghi chú thay đổi ( xem )
DLC yêu cầu
Vật phẩm này yêu cầu cần có tất cả các DLC sau
Space Engineers - Decorative Pack #2
Space Engineers - Sparks of the Future
Space Engineers - Wasteland
Tạo bởi
Foltast
Rời mạng
Xem tất cả 506 bộ sưu tập tạo bởi Foltast và những người khác (một số có thể bị ẩn)
19,989 Số khách thăm độc nhất
9,336 Người đăng ký hiện tại
352 Lượt yêu thích
Bạn cần DLC để sử dụng vật phẩm này.

Đăng ký để tải xuống
OPC Rokiclaw - Medium Mining Ship

Trong 1 bộ sưu tập tạo bởi Foltast
Outer Planets Consolidation
79 vật phẩm
Mô tả
NO MODS | OPTIONAL SCRIPTS | SURVIVAL READY
CONTAINS: DLC | PARTIAL SUBGRIDS




Due to growing needs and production capacity, Consolidation is gradually upgrading its ships. Following Turbot, which replaced utilitarian drones, it was time to upgrade the fleet of mining ships. The old Ferret, which had served the outer colonies well before the formation of the OPC, had exhausted their technical capabilities. And while the Consolidation was preparing these ships for sale to buyers interested in a cheap mining fleet, they were replaced by Rokiclaw - a new generation of space mining ships.

Rokiclaw - a ship developed by OPC as part of the expansion of asteroid belt mining within Consolidation systems. being the middle model in the line of the new fleet, Rokiclaw is primarily designed for excavation operations, for which the front mining installation is used, but despite the fact that due to its size, this ship is not able to independently dive deep into asteroids in a direct course (instead, it must gradually move as "ticker"), the mining drone included in its composition can do this instead, and a special place for the drone pilot will allow you to take on board an additional crew member, thanks to this, there is no need to distract the pilot of the ship from his tasks.


Survival ready
Airtight interior
Transparent LCDs for displaying additional information about the ship
2 Double H-69S Power engine
12 Large cargo containers
12 Small hydrogen tanks
5 Mining Drills
1 DSM-2 Rynir Mining Drone


5125 small blocks (with drone)
18.546 PCU (with drone)
4920 small blocks (without drone)
16.720 PCU (without drone)
221.959 Kg mass


An few important point about Survival Ready: I love survival and therefore the ship is primarily designed for use in survival mode, but there are several subgrids on board. They construction in survival is not mandatory (we are talking about landing gear, but since the ship is designed for space travel, it can safely use the connector for the dock and the overall design of the ship provides no chassis), but for those wishing to use the landing below there are simple instructions on how to collect and prepare their own chassis




HOW TO CREATE LANDING GEARS:
FRONT:
  1. Place rotor to front hinge
  2. Set it name as "Rotor"
  3. Set it lower limit to 0 and upper limit to 90 (be careful about the location of the block, you may have other values. It is important that the difference between the lower and upper limit is no more than 90 degrees)
  4. Set it torque to 10kNm and braking to 29 kNm, velocity to 5rpm and displacement to 4.5cm
  5. Place Landing Gear to rotor top
  6. Add Rotor and Hinge to "Landing Gear Front" group (or update if group exists)
  7. Add Landing Gear to "Landing Gears" group
REAR:
  1. Place Pistons on the rear hinges
  2. Set their names as "Piston LG-L" and "Piston LG-R" (where -R and -L is Right or Left)
  3. Set their velocity at 0.5m/s and maximum distance 2m
  4. Place on their top hinges
  5. Set lower limit of hinges to -30 or 0 (depends on which side you install the block on) and upper limit to 0 or 30
  6. Set Torque to 3.1 MNm , Braking to 6MNm and Velocity to 4rpm
  7. Set their names as "Hinge LG-R2" and "Hinge LG-L2" (where R2 and L2 is Right or Left)
  8. Place Landing Gears to top of hinges
  9. Update or create groups "Landing Gear Rear Hinges" and "Landing Gear Rear Pistons"
  10. Add all hinges to "Landing Gear Rear Hinges" and all pistons to "Landing Gear Rear Pistons"

Update 16/02/22:
Added OPC mOS
Fixed interior air leak




Want to be on the edge of news and see what other will not? Join the OPC discord! https://discord.gg/zZHAccYpzV
If you have any ideas, suggestions or just want to express your opinion, then be sure to write in the comments section!
54 bình luận
< >
zer0 27 Thg08 @ 9:05pm 
built this today, learned that when the cargo is completely full, the vertical thrust is extremely poor, barely noticeable. this thing could definitely do with more... my only other complaint is how tight of a fit the mining drone is, but im sure practice will help with that. overall, very cool looking ship, very functional. i like
Foltast  [tác giả] 11 Thg10, 2022 @ 6:02am 
Check if you can move objects between the top connector and the ship containers. Try to move something from your inventory (for example, NATO magazines) with a small volume (unlike ore, some components or items take up too much space and cannot be moved through small conveyors), then check whether the "Throw Out" mode is enabled at the station connector. Also try to enable this mode at the ship top connector
bumble 10 Thg10, 2022 @ 10:59pm 
Might be late, but I collected a shit load of ice and it won't automatically transfer out of the top connector into my space station, and I can't access the mining ship's cargo from my space station. Anything I can do about this?
OzzieWorm 27 Thg04, 2022 @ 4:28pm 
This looks amazing!
Would love a Atmo/Space capable one!!!
PIKA4Y 27 Thg03, 2022 @ 6:01am 
Ok
Foltast  [tác giả] 24 Thg03, 2022 @ 9:22pm 
No problem! Don't forget to share a link to the ship, it will be interesting to see it!
PIKA4Y 23 Thg03, 2022 @ 1:29pm 
Уважаемый Автор, могу ли я с вашего позволения взять Ваш чертёж, естественно он будет переработан, большая часть его, меня больше всего интересует схема Кабины и всё, остальное я сам придумаю :)
Foltast  [tác giả] 21 Thg03, 2022 @ 11:21am 
The mOS script has been fixed and all models using it have been updated. The scripts themselves (a few variations for different vehicles) are posted in https://discord.gg/zZHAccYpzV for you to manually update it in your worlds.
Foltast  [tác giả] 18 Thg03, 2022 @ 8:02pm 
Hi, thank you! Yes, some players have encountered problems regarding mOS and at the moment I am working on a solution for this. Temporarily, you can disable mOS, since it does not carry any ship control functions at the moment. I will publish a message under all models using mOS when the problem is fixed, so stay tuned!
TurokGMT 18 Thg03, 2022 @ 3:17pm 
Hey there - first off, really love the design of the whole fleet - I've subbed to them all!
I've built the Rokiclaw in survival, but seeing a few broken buttons on both chairs - presumably to with cub grids but also the programmable block is throwing several script errors du to script complexity - is there an updated version of the OPC mOS available?