Abonnera för att ladda ner
Grind-O-Matic 1100

Why transport enemy hulks to your base's grinder pit when you can fly your grinder pit to the hulk? Spiff's Practical Engineered Solutions, a division of the Weyland-Yutani Corporation, presents the Grind-O-Matic 1100 planetary grinding ship with six large and four medium cargo containers for part storage. With realistic (i.e., 1-1-1) settings, the cargo capacity of this high-capacity scrapper, including connector and 34 grinders, is nearly 1,100 tons (which corresponds to nearly 55,000 steel plates). Under full load, Grind-O-Matic 1100 requires 26 large atmospheric thrusters that are powered by four large reactors and 10 batteries to safely operate and maneuver. This ship will easily pass through a 7-wide opening of airtight hangar doors.

Archon's Autolevel script is used to prevent over-tipping during the grinding process: https://gtm.steamproxy.vip/sharedfiles/filedetails/?id=1366126191

NOTE: In-game scripts (in advanced settings) must be enabled for the autolevel script to function!

NO MODS, NO DLC, NO ROTORS/PISTONS; SURVIVAL READY AND PROJECTION BUILDABLE!

SHIP STATISTICS
- 473 blocks
- 8,824 PCUs
- 219 tons empty mass

CONTROLS
{1} Grinders
{2} Camera Down
{3} Spotlights ON/OFF
{4} AutoLevel ON/OFF
{5} Batteries AUTO/RECHARGE
{6} Marker Lights ON/OFF
{7} Antenna ON/OFF
{8} Connector SWITCH LOCK
{9} Atmospheric Thrusters ON/OFF

NOTES FOR BUILDING WITH A PROJECTOR
The ship's grid pivot (i.e., reference point for the projection) is the center of the cockpit's base. As shown in the last picture, three (3) blocks should be added above the projector to ensure adequate clearance when building, and the projector's vertical offset should then be set to -5 and forward offset set to -1 to properly align the projection for the building process.

ADDITIONAL NOTES FOR OPERATION
Ship grinders are not like ship drills; they are somewhat fragile. So take care not to jam the grinding process lest you spend some of your hard-earned parts (and time) to rebuild the destroyed grinders. I've found that periodically moving laterally to let the side grinders do their thing helps maintain adequate clearance for the plunge-grinding process. Finally, convert ships to stations, if possible, to stabilize the deconstruction process. Now go plunder the wasteland for the glory of your galactic empire!