Mağaza Sayfası

Stormworks: Build and Rescue

Tümü Tartışmalar Ekran Görüntüleri Çizimler Yayınlar Videolar Atölye Haberler Rehberler İncelemeler

Stormworks: Build and Rescue > Atölye > EmK530 Kullanıcısının Atölyesi

Yeterli oy yok

Camera Switcher

Açıklama Tartışmalar0 Yorumlar5 Değişiklik Notları

Ödül

Vehicles: Creative, Mechanical

Microcontrollers: Calculation, Microcontroller

Etiketler: v1.0.15

Dosya Boyutu

Gönderilme

56.536 KB

4 Eki 2020 @ 6:35

1 Değişiklik Notu ( görüntüle )

1,018	Tekil Ziyaretçi
510	Mevcut Abone
4	Mevcut Favoriler

İndirmek için abone ol
Camera Switcher

Abone Olundu

Abonelikten Çık

Açıklama

This microcontroller lets you switch between up to 8 video inputs using two button inputs.

Video Output (Video): Connect this to a monitor, duh.

Camera Input 1,2,3,4,5,6,7,8 (Video): Connect a camera to one of these, start with 1 and make your way up with how many cameras you want to add.

Number of Cameras (number): Use a constant number and set it to the number of cameras you have put into the microcontroller, then connect the number to the microcontroller.

Camera Left (on/off): Connect a push button to subtract the camera number by 1.

Camera Right (on/off): Connect a push button to increase the camera number by 1.

Enjoy!

5 Yorum

< >

Bane882266 7 Eki 2024 @ 4:05

Great I can use this so many different places.
When loading a microcontroller you need to look in the workshop tab if you can't find it.
You can remove or change the "camera 1" text by deleting the second to last line on the last LUA controller.
The number input makes the camera inputs loop. If you put in the number 3 when it reaches camera 3 and you go up one again it will loop round to camera one.