Stormworks: Build and Rescue

Stormworks: Build and Rescue

Недостаточно оценок
Camera Switcher
   
Наградить
В избранное
В избранном
Удалить
Vehicles: Creative, Mechanical
Microcontrollers: Calculation, Microcontroller
Метки: v1.0.15
Размер файла
Добавлен
56.536 KB
4 окт. 2020 г. в 6:35
Обновлений: 1 (просмотреть)

Подпишитесь, чтобы загрузить
Camera Switcher

Описание
This microcontroller lets you switch between up to 8 video inputs using two button inputs.

Video Output (Video): Connect this to a monitor, duh.

Camera Input 1,2,3,4,5,6,7,8 (Video): Connect a camera to one of these, start with 1 and make your way up with how many cameras you want to add.

Number of Cameras (number): Use a constant number and set it to the number of cameras you have put into the microcontroller, then connect the number to the microcontroller.

Camera Left (on/off): Connect a push button to subtract the camera number by 1.

Camera Right (on/off): Connect a push button to increase the camera number by 1.

Enjoy!
Комментариев: 5
Bane882266 7 окт. 2024 г. в 4:05 
Great I can use this so many different places.
When loading a microcontroller you need to look in the workshop tab if you can't find it.
You can remove or change the "camera 1" text by deleting the second to last line on the last LUA controller.
The number input makes the camera inputs loop. If you put in the number 3 when it reaches camera 3 and you go up one again it will loop round to camera one.
Mr.Dylan 26 июл. 2024 г. в 9:07 
it dose not show up
birb 12 апр. 2022 г. в 15:56 
YOU HAVE SAVED ME HOURS OF TIME, THANK YOU SO MUCH
TTan 8 янв. 2022 г. в 13:30 
Making a fnaf 3 map rn this might help
IslandLife284 22 фев. 2021 г. в 10:38 
No Feed from Cameras