Kauppasivu

Stormworks: Build and Rescue

Kaikki Keskustelut Kuvakaappaukset Taideteokset Suoratoistot Videot Workshop Uutiset Oppaat Arvostelut

Stormworks: Build and Rescue > Workshop > Käyttäjän EmK530 Workshop

Ei tarpeeksi arvosteluja

Camera Switcher

Kuvaus Keskustelut0 Kommentit5 Muutokset

Palkinto

Vehicles: Creative, Mechanical

Microcontrollers: Calculation, Microcontroller

Tunnisteet: v1.0.15

Tiedostokoko

Julkaistu

56.536 KB

4.10.2020 klo 6.35

1 muutos ( näytä )

1,018	Uniikkeja kävijöitä
510	Nykyiset tilaajat
4	Nykyiset suosikit

Tilaa ladataksesi
Camera Switcher

Lisätty peliin

Peruuta tilaus

Kuvaus

This microcontroller lets you switch between up to 8 video inputs using two button inputs.

Video Output (Video): Connect this to a monitor, duh.

Camera Input 1,2,3,4,5,6,7,8 (Video): Connect a camera to one of these, start with 1 and make your way up with how many cameras you want to add.

Number of Cameras (number): Use a constant number and set it to the number of cameras you have put into the microcontroller, then connect the number to the microcontroller.

Camera Left (on/off): Connect a push button to subtract the camera number by 1.

Camera Right (on/off): Connect a push button to increase the camera number by 1.

Enjoy!

5 kommenttia

< >

Bane882266 7.10.2024 klo 4.05

Great I can use this so many different places.
When loading a microcontroller you need to look in the workshop tab if you can't find it.
You can remove or change the "camera 1" text by deleting the second to last line on the last LUA controller.
The number input makes the camera inputs loop. If you put in the number 3 when it reaches camera 3 and you go up one again it will loop round to camera one.