Butiksside

DayZ

Alt Diskussioner Skærmbilleder Illustrationer Broadcasts Videoer Værksted Nyheder Guider Anmeldelser

DayZ > Værksted > ◣ ▲▼▲s værksted

75 vurderinger

NoExplodingHelis

Beskrivelse Diskussioner1 Kommentarer81 Ændringsbemærkninger

Pris

Type: Mod, Server

Mod Type: Vehicle

Filstørrelse:

Offentliggjort:

Opdateret:

7.389 KB

29. aug. 2020 kl. 15:09

21. apr. 2022 kl. 5:40

7 ændringsbemærkninger ( vis )

Påkrævede emner

Dette emne kræver alle af de følgende andre emner

DayZ-Expansion

Designet af:

◣ ▲▼▲
Offline

Se alle 115 samlinger (nogle kan være skjulte)

9,116	Unikke besøgende
28,672	Nuværende abonnenter
225	Nuværende foretrukne

Abonner for at downloade
NoExplodingHelis

Abonneret

Opsig abonnement

Beskrivelse

NOTE: This mod is partially obsolete since the release of Expansion 1.5.1150 which added a setting for enabling/disabling heli explosions. Only reason to use this mod is if you want to prevent explosions only while the engine is off, or use the logging and notifications it can provide.

Prevents Expansion helicopters from exploding on collision, optionally only if engine is off (see below).
Helis will still get damaged and destroyed if shot at or coming into contact with water.

As helis have a tendency to flip when crashed, it is recommended to use this mod in conjunction with FixVehiclePositions, Snap Heli To Helipad or FlipTransport.

This should be used as a server-side mod (-servermod=@NoExplodingHelis), no need for clients to have it.

Configurable via serverDZ.cfg:

// Enable explosion on collision if engine is on or hit by other vehicle // 0 = Disabled (default) // 1 = Enabled (NOTE: Since Expansion 1.5.1150, // you also have to set EnableHelicopterExplosions: 1 in VehicleSettings.cfg!) NoExplodingHelis_EnableExplosionOnCollision = 0; // Notify pilot if collision would have caused explosion // (only if explosion on collision is disabled) // 0 = Disabled (default) // 1 = Enabled NoExplodingHelis_NotifyPilotOnPreventedExplosion = 0; // Log prevented explosions (useful for debugging) // (only if explosion on collision is disabled) // 0 = Disabled (default) // 1 = Enabled (warning, can cause intense script.log spam!) NoExplodingHelis_LogPreventedRandomExplosions = 0; NoExplodingHelis_LogPreventedCollisionExplosions = 0;

Populære diskussioner Vis alle (1)