サブスクライブしてダウンロード
ASCO Gas-Bot Example

(Disregard the different colors of the nodes)

THINGS TO NOTE:

1. You can turn off the auto-disconnect.

2. You need to double check that everything is connected properly, some people forget about the composite so remember that.

3. Double check that you selected the right fuel in the Microcontroller.

4. The Laser Beacon needs to have 1 block in between it and the Fluid Connector.

5. Make sure that the Fluid Connector is to the ~Left~ of the Laser Beacon if it is on the ~Left~ side and make sure that the Fluid Connector is to the ~Right~ of the Laser Beacon if it is on the ~Right~ side.


If you have any issues that cannot be solved by anything aforementioned, please contact me.